DEUTSCH 230 PCS DT 2 & 4 PIN GRAY CONNECTOR KIT OPEN BARREL STAMPED CONTACTS (MADE IN USA)

Description

Kit content: * 14 x DT04-2P (connector) * 14 x DT06-2S (connector) * 14 x W2P (wedge) * 14 x W2S (wedge) -------------------------------------------------------- * 9 x DT04-4P (connector) * 9 x DT06-4S (connector) * 9 x W4P (wedge) * 9 x W4S-ZZ (wedge) -------------------------------------------------------- * 64 x 1060-14-0122 (14-16 AWG nickel Stamped Pins) * 64 x 1062-14-0122 (14-16 AWG nickel Stamped Sockets) * 10 x 114017 (Seal plug) -------------------------------------------------------- Performance specifications: Temperature: Operating at temperatures from -55° C to +125° C continuous at rated current.Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement.Vibration: No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond.Physical Shock: No unlocking, unmating, or other unsatisfactory result during or after 50 G’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202, Method 213, Condition “C”.Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications.Insulation Resistance: 1000 megohms minimum at 25° C.Moisture Resistance: Properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage.Dielectric Withstanding Voltage: Current leakage less than 2 milliamps at 1500 VAC.Thermal Cycle: No cracking, chipping or leaking after 20 test cycles from -55° C to +125° C. Review: Great Value - This is a great kit the connectors were easy to install and its a great deal for all these peices. Review: Description should say that pins and receptacles are "open barrel". - I was looking for a kit that used the four-point Deusch crimp tool that ensures a good crimp at each finished end. This kit has "open barrel" metal pins that have the inferior fold-over wings that are MUCH less secure, easy to get wrong, and much more likely to fail. I have purchased a set of "closed barrel" pins for another $35 from McMaster Carr. Not happy about that.