





Desertcart purchases this item on your behalf and handles shipping, customs, and support to KUWAIT.
🚀 Elevate your server game with Rosewill’s powerhouse chassis—where performance meets precision.
The Rosewill RSV-Z2850U is a robust 2U rackmount server chassis designed for professional-grade builds. Featuring 6 internal drive bays, 7 PCI expansion slots, and ATX motherboard compatibility, it supports versatile configurations. Its advanced cooling system includes four 80mm fans for quiet, efficient airflow, while front panel LEDs and USB 3.0/2.0 ports enhance usability and monitoring. Crafted from durable alloy steel, this chassis balances high performance with sleek, functional design.

| ASIN | B0B84SZ4RQ |
| UPC | 840951134429 |
| USB2.0ポート数 | 1 |
| USB3.0ポート数 | 1 |
| USBポート数 | 2 |
| おすすめ度 | 5つ星のうち4.6 24 レビュー |
| カラー | ブラック |
| ケースタイプ | タワー |
| サポートするマザーボード | atx |
| ハードディスクのフォームファクター | 2.5 インチ |
| パック数 | 1 |
| ファンの数 | 2 |
| ブランド | Rosewill |
| ブランド名 | Rosewill |
| マザーボードの互換性 | atx |
| メーカー名 | Rosewill |
| メーカー型番 | RSV-Z2850U |
| モデル名 | RSV-Z2850U |
| 互換デバイス | サーバー |
| 内部ベイの量 | 6 |
| 冷却方法 | 空冷 |
| 品目の寸法 (D x W x H) | 8.9奥行き x 55.2幅 x 42.9高さ cm |
| 商品の推奨用途 | ビジネス |
| 商品の追加説明1 | 多ファン冷却システム |
| 商品の重量 | 14.55 ポンド |
| 商品外装素材 | 合金鋼 |
| 型番 | RSV-Z2850U |
| 扇風機のサイズ | 80 ミリメートル |
| 材質 | 合金鋼 |
| 色 | ブラック |
| 製品の推奨用途 | ビジネス |
| 電力供給の取り付けタイプ | リアマウント |
K**R
solid frame
ordered this one by accident, not checking the size. it's well made and sturdy, appeared rather straightforward and easy to use. cable management may be a bit tricky because of the fan placement, but i'd build in it if i needed it.
K**L
Good, but P/S can be a bit tight.
I like these cases, they're decently made and everything fits properly. Power supply fitting can be a bit daunting, but otherwise no issues.
M**I
Great case
Great 2u case. Only con is the cable for the PSU is really inconvenient
P**L
very very solid...minimal clearances though. Fans are decent.
I replaced all of the internal fans with Noctua 80mm, and tbh...the sound difference isn't that minimal. I ended up reusing the stock fans in different parts of the case. I did two desktop conversions with these cases, and each worked out although the clearance between the onboard sata ports and the fan housing was so short, I had to remove that housing the get insert the sata cables (and I had to use differing directional angular connections (one up, one down) to fit one of the boards in. I managed to fit 8 drives (6 hdd, 2 sdd) in the drive bay area, but the gap between the drive bays and the motherboard enclosure is a bit small...fortunately, I installed a sas card with thin sata cabling (otherwise, they wouldn't have fit). Clearance between the drives and the fan enclosure is also a few mm too small...cabling coming out of the drives bends sharply against the fan grills (they're ultra thin too), and I ended up breaking one of them (finding out after reassembly...sigh). Being gentle helps there. The one real gripe though, is that the psu compartment is too small for all of the psus I have. I got it to fit, but had to take out the mounting bracket as the psu length is an inch or so too long, so it's just wedged in there. The rails come out of the psu and run right into one of the 4 (optional) 80 mm fans, so I could only power the drives and fans off of the two rails that were far enough to the right to avoid that fan. You will definitely need fan grills on all internal fans. The 80mm space in the rear doesn't have mounting wholes...do I used HVAC tape. It might sound janky, but its stable. Zip ties area your friend as well at keeping cabling in order. I also ended up getting a Noctua low profile cooler to replace the typical monster sized desktop ones. I had to bend it a bit to get it to clear the ram, and still fit inside the 2U enclosure. Had to remove the ram heat sync's as well, but that Noctua was so large it covered the ram as well, so...I suppose that's a little bit of a positive side effect. Note to self: never throw away low profile card brackets...the generic ones I ended up using don't really fit the cards. In total, it was worth the conversion, although with a 10G and SAS card installed. Drives are the same temperatures as they were in the desktop case (29c-35c) even under continuous load. It took a lot of hours though to get things in and fitting...taking things apart when they dont fit and re-routing cables. The second time around though had a much more clean looking result. I don't use rails...my rack has three shelves in place as-is, so they're just stacked (bolted, with spaces on the back side for the same clearance I would have gotten with rails) I think I will go for a 3U or 4U next time just for better clearances for cabling, and more GPU options (which I didn't have for these conversions).
O**K
Nice simple 2u chassis
Its a great 2u case. Great value for money. I chose the one without any external drive bays as I'm using TrueNAS with an NVME on my motherboard connecting to an external disk shelf. The 2 included 80mm fans are pretty strong and provide decent airflow to the CPU cooler. I also have a 3U version of this and the build quality is excellent on them. The motherboard and expansion cards line up perfectly without issue
Trustpilot
1 month ago
2 weeks ago