StarTech.com 1U 放熱スリット付きサーバーラック棚板 伸縮式ラック収納棚 耐荷重80kg ADJSHELF

よく読まない私がアホなんですけどね。 伸縮して固定位置を調整できる"固定式"棚板ですね。 物はしっかりしていてちゃんとしていましたよ。うん。 もし私みたいなアホがいたとしたら注意してね。

伸縮式棚板 を購入しました 19インチラックのケージナットと固定用のネジもついていて 良い製品だと思いますが ネジがM６なのでご注意 (自分は前に使っていた機器のケージナットと交換しなきゃいけなかった) 前左・前右(この2つは奥行きの短い金具) 後左・後右の4つの金具と 棚板で構成されていて各金具を棚板にねじ止めする ネジは、プラス頭のボルトとナットでねじ止めでほかの人も書いてますが ねじ止めがしづらいですが 自分の環境の場合、奥行きが長いラックでしたので 前の金具2つをしっかり締めてから 後ろの方は金具が長いので そちらを後にするとネジ締めし易かったです。 製品自体重いですが、棚板の強度はその分文句なしです

某メーカーのラックにもしっかりマウントできました。awsのsnowballを載せるための棚板として購入したのですが対過重的にも余裕でした。

堅牢な作りと思います。 19インチラックに取り付け可能でした。 ただ、この棚板の上に装置を載せ、装置自体の取り付け金具でラックに取り付ける場合は注意が必要です。 この棚板の構造として左右のレール（コの字）に棚板が載る形となります。 ※商品の紹介画像をよくご覧ください。 19インチ幅ピッタリの装置を載せた場合、載る位置がレール上になるため荷重的に不安になります。 なので、厚さ4mm程度の金属板を挟むことで荷重分散を図りつつ、ネジ穴ピッチを合わせる必要がありました。

Very sturdy shelves. Felt very secure when put in (I bought 2). 10/10 and startech will be my new go to! It fit my 35" server rack without issues, put a 125lb server on one and a 140lb server loaded with drives on the other. stability did not seem like a question at all. setup was super easy and quick, really appreciate the fittings they included too!

Writing this review after purchasing six of these over the years. I have a full size server rack that houses my home network and home theater gear. This is a very strong shelf. It's unlikely you'll ever put 175 pounds of stuff on this shelf unless you're using it for a non-standard purpose, such as storing bags of cement or bricks. I have two, 4U servers that are home-built, meaning they didn't come with rack rails. Though you can get generic rack rails, they never work correctly and are more trouble than they are worth. Those go on these shelves. I have a a Denon HT receiver/amp that weighs about 30 pounds. A regular, 2U rackmount shelf just bends and isn't safe. So that goes on one of these shelves too. There is a trick to installing these shelves in a rack and it helps big time if your rack has open sides like mine does. Only attach the front mounting ears to the shelf. You will need about 4U worth of space to slide the shelf into the rack with the front ears attached b/c the screws that hold the ears to the shelf stick out and won't clear the rack rails. You'll have to angle the shelf diagonally a little bit to slide it in. Loosely secure the front brackets to the rack rails. Loosely install the rear brackets on the shelf, leaving them loose enough to slide back and forth. Tighten the rear mounting ears to the rack rails. Tighten the rear brackets to the shelf. Now, tighten the front brackets. I recommend using a socket and socket wrench on the nut, while you hold the screw in place with a Philips screwdriver to tighten the brackets to the shelf. The brackets are what hold the shelf up. Tighten the snot out of the brackets and you'll never have a problem. The mounting ears are exactly 1U in height, meaning if you intend on mounting something directly underneath the shelf, you have to ensure the brackets don't sag downwards into the 1U space directly underneath it b/c it will interfere with whatever you're trying to slide into that space. Other than those quirks, these things are built like a tank. I've had 100 pound UPS's and servers that weighed almost that much on these shelves and they don't bend, break, creak or do anything but sit there and take it. Pre-pandemic these shelves were about 25% cheaper than they are now. But, everything has gone up in price. Welcome to the new reality, I guess. Highly recommend this rackmount shelf!

Ripiano ben fatto e molto solido. Peccato solo per il prezzo non proprio basso

Parfait pour des amplis de puissances de 40 kilos

pas très pratique à installer (plus d'1 heure) semble solide (ça a l'air de supporter 15 kilo) mais les systèmes de glissières ne sont ni ergonomiques ni rassurants