eSUN PLA+ Filament 1.75mm, Enhanced Toughness, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Polylactic Acid, Black

Filament works well. Good adhesion and few failed prints. Strength seems ok. I've had problems in the past with pla filament that breaks in storage if placed under any strain, e.g. if you thread the end through holes in the spool to stop it unwinding. This pla+ seems to behave better.

I always find Esun PLA some of nicest Filament to use as a beginer. I have had no problems with clogging, or Adhesion as long as you stick to the directions and the advised temp range you'll be fine. prints in normal pla and the matte pla always have a lovely finish and texture and I have found the Colours to be very consistant, and above all it's great value for money.

Good filament, I used this for quite a large print without testing it much and the results were good. I really admire the usage of cardboard spools, since it minimises plastic waste in an industry where we do inherently waste a lot of plastic.

I've been using eSun PLA+ since I began 3D printing in May. I went through 9 x 1kg spools (1 silver, 2 purple, 1 cold white, 4 black and 1 grey) without any problems. The next spool (grey) was stringing like mad, no matter what temperature and retraction settings I used. I switched to a spool of purple and had no issues, so it wasn't something wrong with my printer. So, after chatting online with some more experienced printers, I bought a filament dryer. I weighed what was left of the grey spool (approx 900g including the spool) before putting it in - after 4 hours I took it out and weighed it again - it was 4 g lighter. That told me that the stringing problems I'd been having were down to excessive moisture in the filament. Once the purple roll was finished I put the now dried grey roll back on and it printed fine until near the end (probably about 150-200g of filament remaining) where I found it was a bit tangled - actually, I realised what was happening because it almost jerked the spool and roller off the shelf above the printer. Luckily I caught it before it wrecked a print, not to mention the printer. I shifted the spool onto the normal frame-mounted spool holder. At that point I went to put the next roll of grey into the filament dryer and saw that it was really badly wound. I spent several hours winding it onto an empty spool, then back onto the original spool. It was quite clear to me that it had been very badly rewound onto the spool it had come on - the filament was twisted and in many points looked to be stressed. I then dried it for 4 hours, leaving it in the drier until the roll on the printer finished. It started printing OK, but then there was some stringing again - I think it probably needed more than 4 hours in the drier. Yesterday I switched over to a roll of purple. It looked to be much better wound...right up until it got about 3 layers down where the filament started to get stuck under what should have been lower layers. Interestingly, all three spools I've had problems with were ordered during September. I suspect that there must have been a major issue at their plant a few months ago for their quality control to have slipped so badly. I'm reluctant to change brands as up until these three spools I've had a great experience with the eSun PLA+ - zero clogs, great print quality, good layer adhesion. However, I do have some Sunlu PLA+ to try.

Good filament

Excellent prints great

The **eSUN PLA+ Filament 1.75mm** is a fantastic choice for 3D printing enthusiasts who need enhanced toughness and durability without compromising on print quality. This **PLA Plus filament** builds on the easy-to-print properties of standard PLA, offering increased impact resistance and tensile strength, making it ideal for more demanding applications such as functional prototypes, mechanical parts, and detailed models. The filament is manufactured with **strict diameter tolerances**, ensuring smooth and consistent extrusion, which results in high-quality prints with minimal stringing or warping. Its excellent layer adhesion further enhances the strength and durability of printed models. Compatible with most FDM 3D printers, the filament is user-friendly, making it suitable for both beginners and experienced users. Available in a variety of vibrant colors, the **eSUN PLA+ Filament** produces prints with a smooth, polished surface finish. Whether you're creating decorative items, functional components, or artistic projects, this filament delivers reliable performance with enhanced toughness, making it a go-to choice for achieving strong, professional-grade results.

Ordered some previously and was okay, recently ordered another lot and the quality isn’t the same, poor quality and keeps getting stopped as isn’t wound on the reel properly

The product itself is sound. It is the cheapest PLA filament I have ever bought. One downside is that it won’t fit in my A1 AMS, but it makes it all so much more affordable. One thing that bothers me though is the delivery, it was left in the elevator of our apartment complex without telling me a word about it. As I live on the first inhabited floor, I never take the elevator. I talked to neighbours and called customer support. I thought it got stolen because a big amazon package could be something pricy. Eventually before I went to sleep, a neighbour rang the doorbell, he told me that a package to my name was in the elevator. It is very inconvenient to have it delivered like this and not have any information about its location. All I knew is that it got marked as delivered. My delivery instructions also state that I want it left in front of my door if delivery fails, not in the elevator..

Bought 3kg of cold white Prints easily at a very wide range of temperatures. From 180 all the way to probably over 225(highest I tried). The colour is really nice, a true cold white without the yellow tint many white PLAs have. The strength is fine and it can take some abuse before breaking. And when it breaks it doesn't just snap but elongates a bit before breaking. Of course depends on how you print but you can make it watertight rather easily as well and I actually made some tubing out of it that can handle some pressure. Will absolutely be purchasing more since this is at least so far my favourite PLA. Update: Bought it again, absolutely excellent for prototyping. Flows well, prints nicely, strong color, low required print temperature and you can get away with a cold bed. And there's some incredibly nice deals occasionally for it. I bought a 3kg roll for 500skr, so like 165skr/kg, that's hard to beat especially at this quality. The only big downside is the temperature resistance, warm tap water is enough to warp it.

Normal i always order eSun because of the premium quality but this time they only had the biggest seal not the one over the pla itself. All rolls came tangles and had more then once tangles i hope the blue roll i have ordered does not have this issue otherwise i will not order again.

Ottimo filamento acquistato ad un prezzo ottimo

Works a little bit less good than bambu lab pla but that is expected with the a1 mini. Is cheap for it's quality!