10x13cm Hot Foil stamping machine

This hot foil stamping machine is a total game-changer. It was incredibly easy to set up and I was getting professional results almost immediately. The interface is intuitive, making it very easy to use even for those new to foil stamping. What really sets this apart, though, is the outstanding support. They made the process of getting custom dies made completely seamless and stress-free. If you're looking for quality equipment backed by a great team, this is it!

I am in love with this machine and what I can do with it. I saw lots of complaints in the reviews and online about its not having any accessories with it, but the listing was quite clear about that. The machine works well and is a great value. It comes with all the necessary tools and includes extra fuses and a thermostat wire. My only complaint is that although there is a manual with the machine, it would be very helpful to have more resources, particularly about which accessories work with it and how to adjust the machine. The manual is very sparse in its instructions. I spent a lot of money on a letter stamp set that I wasn’t sure was going to work. It was an American made generic set, which works very well, but only because the manufacturer included several ways to attach the letter holder. The slot on the stamping machine is somewhat narrow and would not fit the bolt on that set, but another connector was provided that worked. If you are looking for letter sets, pay attention to the width of the slot and try to figure out if your bolt will fit. As to the machine itself, the only complaint (and I’m not sure if I would call it that—it’s a minor thing) that I have regards the set screws on the shaft that allow you to raise and lower the stamping unit. The biggest challenge in stamping is positioning. When I released the set screws, the machine not only moved up and down on the shaft, but it can rotate freely. I know at this point someone more experienced with machines will laugh at me, but I am having a struggle resituating the stamping portion of the machine so that it is square (thus making my lettering straight).. If the heating portion didn’t rotate, this would not be an issue. But I’m sure this will not be an issue for anyone who is more experienced. Finding more information about accessories and even how to use the machine is a challenge. I went on a search for videos and found only one specific to this machine. (It was very helpful and told me how to adjust the height of the machine; otherwise I never would have known.) If Fasttobuy would provide that information, it would be very helpful. I know that the company makes stamps, etc., and I’m sure that they are very helpful with their own products. However, I bought the generic set because of its price and the number of letters it included. Most of Fasttobuy’s sets don’t include enough letters to print the names I want to print. All in all, though, I am very pleased with the machine and plan to have lots of fun with it.

This machine is great and so is the stamp support! John worked with me to get my file right. And when I messed up, he sent me another one for free! In the US this would have cost at least $2,000 to do (!) Note 1: John is epic 💯 Note 2: US manufacturing might be cooked 💀 Helpful info: Get Stamp: Q. How do I get the brass stamp? Email is on the first page of the booklet the machine comes with. They will work with you. * I censored it it out in case company doesn’t want it leaked since I couldn’t find it on amazon page as of Mar 11th 2026 Size: Q. Where does the stamping plate start? At the 3.3cm mark on the vertical axis Q. Where does the stamping plate end? At the 13.3cm mark on the vertical axis Q. Where is the center of the stamping plate? At the 8.3cm mark on the vertical axis Temperature: * All numbers in °C * PV = Present Value of the heating plate (what it is currently) * SV = Set Value of the heating plate (what it will be) * Note 1: The PV and SV measure the heating plate. Through personal experimentation, I have found that the actual temp of the brass die is ~10-15 °C less (because heat transfer and material properties and such) * Note 2: Room temperature plays a role in what the die temp is. Actual die temp is impacted up to 5 °C by ambient temperature. You can verify with a kitchen thermometer (I tried a heat gun too, but it didn’t seem to work in actually finding the surface temp of it) Anyway guys hope this is helpful and you have a good day

Works great so far no issues. Did figure out a way to ensure perfect placement by using a laser light attached to top. Stamp something then align the laser to where it stamped then put the next object right on the laser line. Thank me later.

The machine is great. Really well made, solid, and heavy. Setup was pretty easy just by following the manual. I reached out to the company and they were super quick to respond, really helpful, and had a hot stamping plate sent out insanely fast. I’d definitely recommend it for any of your hot stamping needs. Great company, great product.

The ONLY reason this gets 4 stars and not 5 is because soon after I started using it the fuse blew, and it then subsequently blew every spare fuse supplied - there were 4 spare 5amp fuses which probably says something! However I purchased some 6.3amp fuses ( https://www.amazon.co.uk/dp/B085N3Q2ST?ref=ppx_yo2ov_dt_b_fed_asin_title ) and the problem was solved - with only a days delay - thanks to Amazon Prime! the machine has now worked faultlessly for several weeks now and I can only assume that the problem was due to initial current surge overloading the fuse when turned on. The other thing to be aware of is the temperature zooms up to nearly double the dialled in temperature before settling back to the dialled in temperature (in degrees C). This takes around 5 or 10 minutes depending on the required temperature. The results are excellent once you've done some practice runs, I now use it in my leather work and I'm blown away by the quality of the imprints now that I've got the temperature, time and pressure sussed - for me 100 deg C, 1 to 2 seconds with enough pressure to collapse the springs without bottoming out. Would definitely recommend. BTW don't forget to let it fully cool before removing the letter stamping beam - I learnt the hard way!

Muy buena compra funciona perfecto y es mis sencilla de utilizar, tengo un año y no ha tenido fallas

I have used it for several month now and happy with it as far as setting temperature & accuracy I think it is pretty good. The difficulty is that I can't find any accessories to attach letters, or jigs . I use a square brass stamp and figuring out the right location is difficult.

I ordered this foil machine for my small biz and so far I'm impressed! I appreciate the size as it doesn't take much space and is easy to put away when not in use. I was pleasantly surprised when I saw that it included all the little tools and even some tester foil sheets. The instruction manual includes photos which is also very helpful. All in all I'm very excited to see all the pretty, shiny, foil-y things I can make with this machine!

Turned it on once, didn’t even stamp and we followed the instructions andddd bought high quality stamp foil but nothing. Turned it again to check and it won’t show any signs of it being on, it’s plugged in but it’s off so I want a refund thank you