Instructions to achieve amazing results by OAKTECH reinforced (RF) series PLA Filament. The printing platform is a flat and horizontal surface made by good quality material. The extruder should be adjusted to a proper height from the printing surface. Be sure to choose the right printing temperature respectively according to different 3D printers. Be sure to choose the right printing speed according to the ambient temperature. Be sure to tighten the thread properly and insert tail end into the spool hole to avoid tangles. Keep the filament in a dry place and sealed until next usage. Know More about OAKTECH reinforced (RF) PLA 3D Printer Filaments 100% Bubble-Free Guarantee! Diameter: 1.75 mm +/- 0.05 mm Print temp.: 374 - 446 Fahrenheit / 190 - 230 Celsius Print speed: 30 - 60 mm/s Layer height: 0.2mm Printing bed temp.: not necessary or 60 - 80°C in winter Length: 355yd / 325m per spool Storage ambience: - 20 to 50°C / -4 to 122°F, dry and keep away from heat. Thank you for choosing OAKTECH product and please get in touch about any issues you’re having and we’ll try our best to respond with 24 hours.
P**S
Like the filament overall however
Decent filament. Brown was a little brittle, and have had a few tangles in the spooling so far. Like the filament overall however.
R**X
Two Stars
Does not seem to have uniform quality
S**H
Five Stars
Works great with no issues at all.
L**F
Four Stars
Not a good material to bind someone's hands with.... But still good looking when printing with
A**R
Works great for lithophanes
Prints amazingly well, no jams so far after 3 spools. Currently printing at 212 and 66 for the heated bed. Works great for lithophanes.
Trustpilot
1 month ago
2 weeks ago
