Carbon Fiber 3k Matte 31.8 mm Trial/Triathlon Bike Bicycle AERO Bars Handlebar 1 Pair of Spare Pads 2 Spare Screws 4 Bar End Plugs Caps

These were just what I was looking for - something cheap and light to add to my road bike for a "no drafting" race. Took a few rides to get them tight enough not to move, but only because I didn't want to crack the carbon by over tightening. Not adjustable, but that was fine for me... I could get a reasonably good position. They do say "seat post" at the front as other reviewer said, but it's not particularly obvious and doesn't ruin the look. Overall, exactly what they said on the tin, so can't argue with that.

To the naked eye it looks like the mounting threads (barrels) are assembled into the bar with a torx driver, but will slip out and bounce off into the tall grass slicker than grease. Thus the spare set of bolts are provided. It still makes life difficult mounting the bars unless you glue in the thread barrels while the Hex Bolts are in place? I also recommend you choose the V-shaped or cross bar attached Aero Bars. Because no matter how tight you mount a pair of Aero Bars, your bike is going to eventually look like a Ram with uneven horns.

Like everything about these carbon bars excerpt: at the tip of the bars just below the end caps are the words in white letters "SEAT POST" not something I want to see on my carbon aero bars! I contacted IVEKE, they checked their warehouse and found that all of these bars had "SEAT POST" printed on them, IVEKE offered a 5 present compensation or return for a refund, I took the compensation

horrible. impossible to install. no exaggeration i tried for 5 hours. do not waste your time and money on these.

Since the bolts spin inside the chamber with no way to hold them steady from the outside, it takes a lot of time (and luck) to get the bolts started. It took about 10 minutes to properly insert each bolt.

The aero bars are a great bargain for someone not looking to invest a lot of money. They are light and sleek and very easy to mount on the bike. I would recommend them to all beginners and anyone who is not planning to race a lot.

All items were received as per the order, delivery was very fast and delivered to my doorstep but the bolts supplied were too short. The 6 supplied bolts were 25mm long but need to be 30mm long to allow the bars to be fixed into place, I am not able to install the bars as is because the bolts are 5mm short. My friend has an identical set of bars from a different supplier (RXL SL branded) which fitted perfectly on my bike and they were supplied with 30mm bolts.

As the other reviewers mentioned, the bolts are too short to have secure engagement with the barrel nuts, which are also very low quality and get easily stripped. I’m extremely disappointed wit the overall quality.