Pond Armor SKU-TAN-QT-R Non-Toxic Pond Shield Epoxy Paint, 1.5-Quart, Tan, 48 Fl Oz (Pack of 1)

This is a great product and expect it to provide exceptional protection to my concrete water fountain. Made contact with the supplier and Bruce provided great support with answering my questions and anticipating/surfacing other beneficial points. I indicated my concern about comments regarding the 'clear' yellowing and followed Bruce's advice to avoid "pooling". With the 'clear' I also disregarded one video showing the epoxy being poured directly onto a bird bath and used a brush to make sure the epoxy wasn't over-applied. 'Etching' the concrete and then applying the epoxy took the fountain from a concrete grey to a rich darker grey and was very pleased with this look and was glad I didn't try to get exotic with applying stain(s). I ended up doing the complete fountain, as I wanted a uniform look, and had plenty left over from 1 package (would consider this a large but not a huge fountain). The estimate of 60 sq ft per package worked for me, but really, really would have sucked to be short so I'd say order an extra package if you're going to be close or have extenuating circumstances. I was sensitive to the 'working time' of the epoxy so mixed smaller batches which worked fine for my needs.

Used for fountain where very expensive paint would chip and peel. So far has worked well and is fairly easy to use. You have to work fairly quickly but there is ample time and the results are beautiful.

This is easy to mix and use, and the two parts will remain usable in their cans if you don't need it all at once. The working time of epoxy is about 20 minutes, so depending on what you're doing, you may or may not be able to spread it all before it hardens. In my experience, it goes from liquid to chunky to unusable in about three minutes on a warm day. It has a glossy finish when hardened.

This stuff works great for my leaky fountain basin due to cracks. It saved thousand of dollars for not having to buy a new fountain. It's been more than 2 years and this it still looks good......no fading of the tan color....no peeling.

We have a fiberglass fountain that was old when we acquired it a dozen years ago. Due to age and some cracking it was beginning to leak a lot. We decided to try and save it and bought this product. It made the fountain like new! There is a little work to do to prep before application but just follow the easy instructions. We have lots of birds and other small animals that drink from it and wife liked that there were no toxin stuff emitted from this product.

Very nice product. Easy to work with simple instructions. Looks very professional when finished.

I purchased the tan color in 2021 and applied it to my water wall basin. After 3 years of summers and winters, the product is still holding up well. As long as you follow the preparation directions, you will have success. Very easy to apply. I used a paint brush to cut in, then a small roller and tray to cover the middle. Just like painting a wall. Before filling each spring, I lightly clean the winter dust off the surface and refill. No visible cracks in the surface. Color is a bit faded after 3 years, but that is expected. I am definitely purchasing this again for my newest project.

I used this for sealing a leaking fountain. I followed the directions precisely and the results were excellent. No more leaks! Having colors (including clear) other than black or white is a big plus, I chose tan. For those that have remarked about the coverage not being 60 square feet for the 1.5 quart kit, I would agree. But remember, the 60 square feet was simply based on the thickness of the coat. If the coat thickness is .02 inches instead of .01 inches (10 mil), the coverage drops to 30 square feet. I had a fairly small project so coverage was not an issue. The thickness on the bottom of the fountain had to be at least .125 inches. Still, I think the manufacturer should make the coverage value 30-60 square feet. One final note. Work fast with this stuff because when it starts to set, the painting is over.

Very good product

The product was only half inside. Only had one can when it clearly should have had two. Update: They replaced the second can when shipping weight was clearly half what it should have been.

Cover good