LF10-4H

Swapped with the old, non-working pressure switch reasonably easily and now my compressor works again!

High quality pressure switch. Takes a little bit more skill to intake than your average DYIer. It nearly was an identical match to the oem switch. Inexpensive replacement part compared to buying a replacement compressor.

My Craftsman compressor was leaking air behind the old pressure switch. I took the old one apart to try to fix, and could not get it back together correctly. Was about to junk the whole thing, then found this part. It went on quickly and easily. The only issues were some of my old brass connectors were stuck and damaged when I tried to remove, so I had to buy those as well. Like others have said, the new unloader valve is straight and the old one was 90 degrees, so I simply put the old valve on the new switch and it all worked fine.

1/4" copper air line tube is over an inch away and now will need modification to work

I used this to replace a bad pressure switch on a 30 gal , 120 volt compressor. The old one would build pressure and shutoff but would not come back on. Replaced with this and its been working fine. You CAN make adjustments to the pressure settings with this.

Did not fix my problem

Arrived as promised, excellent product

This was a direct replacement for my Eagle compressor. Easy to change out. Fixed my issue and I am compressing again.

works good on my old compressor.

ceci est le morceau qui me fallait

I used this part for my air compressor and it worked great.

Excellent and delivered on time

Works great, I had to adjust the shutoff pressure which is just a screw so easy to do, when your installing take a photo of where the wires go so you can easily reinstall on the new switch. (Campbell Hausfield 26 gallon)