TSMST 8FT Sliding Barn Door Hardware Track Kit with Floor Guide and Spring Damping Door Stopper, Smoothly and Quietly, Widest to 48" Wide Door (1.18" to 1.97" Thickness)

I am so impressed by the quality and price of the hardware set. The directions are not great, but it is very simple to put together so they aren’t that necessary. I hung a door that is over 2” think so I put another piece of 1” trim to hang the bar on. Works perfectly!

Used for 4 ft x 7 ft greenhouse door. Works perfectly. A great product for any barn door application, will be purchasing again for other projects.

Great value for the money. Holds a very heavy custom built door with ease and slides nice. The instructions are pretty rough but you'll figure it out. I did use different hardware for attaching the rollers to the door because I'm not a fan of what it came with in terms of ease of installation and toughness. I stripped one of the threads immediately, so I spent 5 bucks on better hardware. Would absolutely buy again.

I used old pallet wood that I found at work to make a custom barn door to section off a hallway in my home. I was able to use the simple directions and install the mount in under an hour. I did have one issue of now being able to line the studs up with the holes because of the placements in the wall. To fix this problem I had to add a 2x4 support to the wall and then mount the hardware to that. Easy Fix

Missing parts that are NEEDED for installation, no way to contact to have replacement parts sent.DISAPPOINTED

Door hanger worked out great. Only thing is if not completely level it will slide easily. I’m just about spot on and not off by much and it still will slide on it’s own. To remedy this I added black 3m electric tape to add a little friction. This helped out a lot. Still glides great and doesn’t walk on it’s own.

Pretty easy to assemble and is sturdy. Only complaint for US customers is that the directions are in metrics. You need a 7/16” or 1/2” drill bit to drill for the wheel attachments. For the wall/anchors we used a 3/8” drill bit. Good pricing.

The sleeve for the bolt was not threaded far enough down resulting in not being able to tighten bolt down to secure roller. Need new sleeve