Cooler Master MasterAccessory Vertical GPU Card Holder Kit V2, Premium Riser Cable PCI-E 3.0 x16-165mm, Adjustable Length for E-ATX|ATX Cases (MCA-U000R-KFVK01)

I recently tested a vertical GPU mount, and overall, it’s been a strong performer with some important things to consider.Pros:* Perfect Fit: This mount is ideal if your case has at least 7 back slots. It fits perfectly, making installation straightforward and hassle-free for most PC cases.* Strong GPU Support: I tested it with several heavy GPUs, and it held up well across the board. The mount is sturdy and easily adjustable to fit different GPUs. However, the main limitation comes from the riser cable rather than the mount itself.* Easy to Set Up: The setup process is very simple, with clear instructions that make installation quick and easy.* Improved Aesthetics: Installing your GPU vertically can give your PC a sleek, modern look, which is a nice bonus.Cons:* Loss of PCIe Slots: One downside is that you’ll lose access to all your PCIe slots when using this mount, which might be a dealbreaker if you rely on those slots for other components.* Riser Cable Limitations: The included riser cable isn’t ideal for high-power GPUs like the RTX xx80/xx90 or RX X800XT/X900XT. These GPUs can produce a lot of heat, which might cause the riser cable to overheat. Plus, the riser cable only supports PCIe 3.0. If you need PCIe 4.0, you might experience performance issues or even fail to get a video signal so remember to configure your motherboard to PCIe 3.0.* GPU Sag: While the mount supports large GPUs, it could be still a slight sag, especially if the GPU is stretched far from the mount. It’s not a huge issue, but if your GPU is close to a fan, it could become problematic.

It's hard to find a nice vertical Gpu mount specially for the Lian Li 011D Mini. I tried to get theirs but you can't find it anywhere. I ordered different GPU mounts and this is the first one that came. Easy instructions. Easy to set up.Pros:* Fist my lian li mini perfectly* handles heavy gpus like a champ (I mounted it on with the Red Devil 6900XT.* easy to adjust.Cons:* you will lose all your pcie slots.* you need slim cables because they will need to go inside your case. Ones with big heads will have a hard time getting them through the slots.* even though it supports my huge gpu, slight sag still occurs, the further you stretch the gpu the more sag you get, but nothing mayor. It will cause an issue of you have a fan too close. Mines was just that that point but isn't interfering with it.It's a great GPU Vertical mount no dought.Great built quality.Just be prepared to lose pci express slots.

This product is more than fairly priced for its build quality and ease of install. Its perfect for showing off my founders edition 2080ti while also eliminating any stress from the PCIe slot. This riser should be a one size fits all for most applications. Its not heavy and pretty sturdy. It fits perfectly into my case aswell. Got it installed in under 10 minutes!

Excellent bracket from Cooler Master. You can show off your GPU in your PC Build. Unfortunately you loss 7 PCI slots. I wish there was a way to include a half-height PCI slot so you can keep a WiFi expansion card or similar. The PCIE Riser is gen 3. works great! It could be longer but should work in most cases. You may have to configure your BIOS to run PCIE 3

Works as intended, the only thing I didn’t like is how the cable that attaches to the motherboard is easy to remove even when clipped in. But not a problem once installed

DO NOT USE THE RISER CABLE THAT COMES WITH THE BRACKET, GET ANY OTHER RISER CABLETHIS RISER CABLE HAS THE SAME PROBLEMS AS THE NZXT H100 CASE RISER CABLE AND IT SET MY $5000 PC ON FIRE AND NEARLY BURNED MY APARTMENT DOWNThe bracket was very well made and supported my 3090 very well and looked great, right up until it went up in flamesI plan on contacting cooler master and seeing if they will do anything to rectify thisDo not use the riser cable, please

I have used the Vertical GPU Card Holder Kit V2 for around two years on my gaming PC, inside my Cooler Master H500P Mesh. It's sturdy and holds the card very well in place. On top of that, you can adjust the position of the card more towards the rear front of the case, which is great if you want to bring it closer to the intake fans on front.By default, it comes a PCI-E 3.0 cable, which was the acceptable solution when this holder was released. However, The last 2 AMD lines and 3 Intel lines all support PCI-E 4.0, and if you have a high-end GPU, using the 3.0 cable provided with this kit will (slightly) degrade your performance. This means you will likely aim to purchase a seperate 4.0 cable. The main problem is that this kit is not compatiable with Cooler Master's OWN 4.0 cable, as it is too stiff (in contrast to the 3.0 cable).I recommend getting the V3 version of the Cooler Master holder for better compatibility with your hardware.

Great but super heavy and need alot of room. Get the one with a gen 4.0 riser cable instead of the 3.0 because it doesn't work on alot of gpu/ motherboards. Gen 4 has a removable section to use on matx motherboard/cases. Everything is there to install it.