ELMERS Carpenter's Wood Filler 1/2-Pint (E848D12)

I may have an unusual use for this product, but I have been using it for years. As a figure painter I have found that it works great for doing the bases of the figures I paint. It is easy to apply, dries well, and is easy to carve or sand if need be, and takes paint with no problem. If I am doing a really large surface I may get a hairline crack or two, but easy to fix with a thin coat that fills/seals it. Picture is used on one of my figures. of one of he Aztec gods.

This stuff is great. I have used it for multiple applications such as restoring a desk that had lots of nicks and dings. This filled the holes just fine and it sanded very nicely once it was dry. I painted over it and you would never know the desk used to have those nicks and dings. High quality stuff!

Exactly what I was looking for good product.

I bought this wood filler to fill in some chips and wholes in a table that I was building and it worked just as expected. It is kind of a putty/paste so it's not to hard to work with and get where you want. There was actually a good sized chip out of the corner of the table I built (about 1/2in deep) and i was able to use the wood filler to recreate that corner of the board. Another thing I like is that it doesn't dry so fast that you cant work with it, yet is doesn't take too long either. I usually gave it at least 8 hours just to be sure but was able to sand on it after that. It sands easier than wood so don't be afraid to over-do it. It also stains pretty well. It doesn't take the stain exactly like the wood, so there's a little bit of a difference in color, but you don't really notice unless you are looking for it, and in the case of the wood I was working with you couldn't tell because there were already many variances in the wood. If they make a smaller portion I should have bought it. I thought I would need a good amount but this little container has gone a long way and it still barely looks like I've taken any out!

i've been unsing this stuff to smooth over and fill in gaps on my PLA 3d prints, works like a champ!

Worked as well as any other wood filler that I have used. No problems using it and it dried fairly quick.

Don't know if it's supposed to be this dry. Honestly it was easier to use my fingers because the putty knife just wasn't very easy to use with this. Once I gave up with it was much easier to spread. I ended up only using the putty knife if I wanted to make something level. Dried fast sanded out smooth. Haven't painted it yet, but it seems like it will be fine. I don't anticipate any issues there but I will edit my review if I have any issues. My tip would be to act like you are five and finger paint it!

Dries fast and is easy to sand. I used it to fill in a corner on a dresser drawer that was competely gone. You can see in the picture that I was able to recreate the corner fairly easily with just 2 passes of this filler. The first was to get the basic shape and the second to fix any blemishes from shaping and sanding. Will see how long the container lasts now that I’ve opened it and only used a little bit, but either way I am happy with the price and quality for what I used it on.