Safego 2 x 10W Motorcycle Headlight Round LED Pod Lights, 12V LED Driving Work Light Front Fog Light Lamp Additional Lights Flood Beam 12V 24V for 4x4 Tractor ATV Offroad Truck

Excellent lights. I have them as daytime running lights on my motorbike. They are nice and bright. Good value for money. Nice and compact.

Great Lights easy to fit although longer cables would of been nicer, really pleased with the light they give out

Safego 10W Cree LED spotlightsI like these lights. They are bright (allegedly between 750 and 900 lumens each depending on voltage) and are focussed with a 30 deg spotlight-spread (and not a 60 deg flood) and although they are not exactly perfect in design they can be made nearly so with little effort to be an ideal safety add-on to any motorcycle.These 10W Cree LED spotlights have a chunky metal body and are surprisingly heavy at around 0.25Kg (half a pound) each. A metal spigot is attached to the nominally cylindrical body using a tongue-and-groove joint. The spigot has a 6mm through-hole (90 deg to the beam) and fits between the arms of the supplied stainless yoke that also has 6mm holes in its arms to accept the supplied 6mm stainless bolt.It is all quite robust except that the slip-in spigot is retained in its grooves by a small self-tapper that screws into the main body of the housing. Although this screw carries no real load, if it were to vibrate free then the main body of the light would slide out of the joint and fall free. I used a cheap 2-pack resin-glue between the spigot and the body to ensure that it will not fall free.The 2-core cable is good quality but a disappointingly short 200mm (8 inches) that sadly guarantees any connector or joint will be visible on the bike.The front of the body has a diameter of 54mm (2 & 1/8 inch) and the body length is 64mm (2½ inch). The spigot is approximately halfway along the body length and the pivot point is about 38mm (1½ inch) from the centre of the beam and about 20mm (3/4 inch) from the base of the yoke. The yoke arms are apart by 28mm (1 & 1/8 inch). All these dimensions are approximate and nominal.10 watts at 12v is just under 1 amp (0.833 amp) for each light.I have only recently bought the lights and so cannot comment on longevity.

I use them for day riding lights on both my motorcycles. They can be improved by a blob of PC heatsink compound behind the element. Probably still last 10 years without!

Arrived on time, looked good and fitted to my motorbike with ease.The lights were bright and looked good and really helped with the dark nights and early mornings.Until the other day when the 10W light became less than faint glow as the LEDs burnt out!You get what you pay for and I can't seem to contact the seller despite there being an alleged 12 month guarantee.If you read this "third party seller", please send a replacement ASAP, otherwise, everyone out there beware of this product and this seller.

I was skeptical about buying these lights to fit on to my BMW GS motorcycle as BMW versions are hundreds of pounds each. But I’d thought I’d give them a go so I brought 2.Once received and opened I was surprised. They look good quality. There made fully out of aluminium so there not cheap plastic. So a good solid product. Quite heavy as well which means there solid.Once fitted to my bike and first switch on they look fantastic. A nice modern white light and yes there very bright. Certainly gave me real shapes in my eyes so I’d avoid starring into them when there on.So for the money I’d definitely recommend these for your motorcycle or anything else you want to fit them to.

Lights are fine but change the BTS They're not stainless steel

Excellent very keenly priced spot lights,They are small but very visible mounted on the front of my motorcycle,well made too.Only negatives are that the supplied bolts are not stainless steel or a very low quality stainless as they rusted,I replaced with quality stainless bolts. Now all is perfect.I would still recommend