CrealityPLA Filament 1.75mm, 3D Printer Filament, 1.0kg (2.2lbs) Spool, No Warp Enhanced Toughness, Dimensional Accuracy ±0.03mm Printing Filament, for FDM 3D Printers (Rainbow)

This is a beautiful filament to use, especially on larger projects! It adheres perfectly. We used a temperature of 200° on our Creality, 3-D printer. You can really see the ombre effect on the larger projects with this filament. The roll seems to last a long time. We did three large projects and it looks like they’re still half a roll left. Worth the cost to buy such a good, quality filament like this.

This filament produces some of the best prints my printer can produce! I highly recommend! Just an over all amazing finish. Similar filaments from different brands do not even compare

This is about the Transparent PETG filament.It's a very pleasant surprise: significantly cheaper than the Bambu/Prusa stuff and an easy purchase from Amazon, yet it but produces equivalent results with ease. Both the MK4 and the X1 Carbon can just use the "Generic PETG" preset and you don't need anything else. It isn't shy about sticking to print sheets either as long as they've been cleaned somewhat recently. Prints end up shiny, smooth, and translucent. It gets milkier if it has a chance to cool down before the nozzle returns to deposit the next layer, so don't print many objects at once if you're after the transparent effect.

Great colors and no issues printing

Horrible. Completely hydrated. Swells like crazy, super brittle, 5 failed prints in a row. Do not buy. A spool of garbage is what I have here.Update 1 month later: They accepted a return exchange and provided a frsh roll. The fresh roll prints perfectly. Updating my 1/5 scroe to 4/5. Still not great that some rolls they sell are junk but nice that they accept exchanges!

I have a number of silk filaments. In the first pic of 5 flowers laid out, you can see a dark gray one on the left and white one on the right, but the purple one in the middle came out so shiny I couldn't even see the layer lines compared to my other silk filaments. Zoom in on the picture to see what I mean.I printed it again and it's the one in on the right in the picture of flowers in the vase. Again the purple practically has no layer lines compared to the others printed with the exact same settings (I just slowed the silk down to 50mm/s) on my Bambu Lab X1C.I love this purple very much and will be buying another roll when I run out. Creality really does silk well compared to some other brands.

Great product for 3D printing.

One may assume that reality would make too knotch filament. But I have tried there hyper filament and now this and not impressed with either. This is the 3rd brand of carbon fiber I have tried and the other 3 which were in the same price categot, one even being cheaper gave me the worst of the 3 print quality. My prints came out, I didn't get tangled, just didn't have a great finish. They hyper filament did have a good quality but I couldn't print any faster or get a better finish than the 15-17$ sunlu pla plus. So unless your getting a deal or have it dialed in perfect then go for it. But if your experimenting with different brands reality is sub par and overpriced.

It was my first time printing with ABS. This one smells less than PLA. I’m still tweaking the settings but I’ve managed to print a few nice test pieces. I use a FLSUN 400 printer. The nozzle temperature is set at 250C and the hot bed at 110C. I was afraid to use such high temperatures but that’s what works with my printer. I also always print the outside first. I think it makes for a nicer piece. At first I had a lot of boogers. Nothing that would stick to the print. But just sitting here and there. So I increased the retraction to 0.8mm. I also had to turn down the feed WAAAAY down. Outer wall was 95%, inner wall 86%, and top and bottom… 76% !!! For a guy that only uses PLA, those number are very weird. But they work for me.

Este filamento es muy bueno! Y los colores son muy vívidos!La calidad de impresión es bastante buena, al igual que el cambio de tonalidades. Es importante entender que cada color va cambiando en un cierto metraje, por lo que es importante usarlo para modelos relativamente grandes (Como el camaleón) para que el color cambie de manera notoria. Los modelos mas chicos no gastan mucho filamento, por lo que no se nota mucho. (Mi recomendación es en ese caso, imprimir varios modelos en el mismo proyecto, de esta forma se va generando el gradiente en todos..La calidad es muy alta, tiene muy poco stringing y sobre todo genera a altas velocidades excelente rendimiento.Algunas especificaciones que usé para los modelos en una ender 3 v3 ke:1. Velocidades entre 100 y 120 para modelos con formas no tan complejas, y velocidades de 90 para formas más caprichosas como el lagarto!2. Temperatura de 210-230 grados3. Base a 65 grados4. Brim para las figuras complejas como el guardián de ZeldaEl filamento cambia de color aproximadamente cada 12-15m, por lo que eso puede ser útil para entender qué tanto gradiente recibirá la impresión!Super recomendable, funciona muy bien y es muy agradable el terminado!Creality adicionalmente tiene un excelente servicio al cliente, te ayudan con cualquier duda o pregunta que pueda surgir!

Impreso con valores predeterminados De Ender 3 S1200°C50mm

Tolle farbe... Nur zu empfehlen

Super look original, très beaux résultats je recommande !