FMA120 Bluetooth 5.4 Dual-Mode Dongle – Supports aptX Lossless, Low-Latency Gaming, Auracast & A2DP-to-Auracast Relay, LE Audio, Hearing Aids, Microsoft Teams, and PS4/PS5/Nintendo Switch

Floogoo is the only manufacturer I know that actively tests hearing aid compatibility when users report issues. With all other transmitters, you're stuck with trial and error—returning it if it doesn't work with your hearing aids. I really appreciate their effort. Good company!I can confirm that this works with Oticon Intent.Prerequisites: Oticon Intent must have the latest firmware (1.2.1 as of now—the launch firmware will not work).You can use their app, FlooCast, to fine-tune the settings. Be patient during the first pairing; it may take a few minutes. If pairing fails repeatedly, turn off AptX and ensure only LC3 is enabled. Don’t use broadcast mode. (Make sure "Prefer LE Audio" and "Public Broadcast" are checked, and leave all other options off except LED.)All other Bluetooth devices paired to your hearing aids must be turned off during pairing. Turn off your phone’s Bluetooth. If you have paired your hearing aids to iPad/Mac, don't forget them. If you have a ConnectClip or TV Adapter, turn them off as well (they likely won’t interfere, but it’s better to be safe).Once paired, you don’t need to turn off the ConnectClip or TV Adapter to use this transmitter. It’s treated as a "phone" by the hearing aids, and Oticon Intent supports multiple Bluetooth connections. You can only have one device streaming audio at a time, but multiple devices can remain connected simultaneously.However, if your iPhone is paired to the hearing aids, you must turn its Bluetooth off in order to connect the FMA120 to your hearing aids. This is because the Made for iPhone (MFi) protocol assumes exclusive use of the hearing aids (you can still use a TV Adapter concurrently, but not a second phone connection).If you connect the FMA120 first, your iPhone won’t be able to stream audio to the hearing aids. If you connect the iPhone first, the FMA120 won’t stream. This is not like the TV Adapter and iPhone combination—those can both stay connected, and the second device can stream as long as the first isn’t actively streaming. With the FMA120 and iPhone, even if the first device is idle, the second cannot stream. So you do need to switch them manually.To switch between them, simply disable Bluetooth on one of the devices. For the FMA120, unplug it. For the iPhone, use Control Center. No need to unpair, don't try it.The signal strength is just slightly better than an iPhone, perhaps because the exposed USB pins are more vulnerable to interference. Any USB 3.0 device—such as an external HDD or SSD—will interfere with it if connected to the same USB hub. This is a known limitation of Bluetooth audio streaming.

I bought the Sony INZONE Buds in 2023 and initially I was only plannung to use them for the PS5, knowing that compatibility will be limited. The peculiar feature of these is that they don't use any classic bluetooth connection or codec (like adptX), only LE Audio (also know als LC3 codec).The only method of connection was the bundled dongle, a rather flimsy piece of equipment and very soon I felt it a bit tiresome to always unplug it from one device and plug it into another; was almost a bit regretful over not having bought inears with broader compatibility.Nonetheless, since the headset was pretty great (good sound and very long lasting battery) I kept it while being on the lookout for a way to connect it to pc and smartphone another way. Smartphone compatibility simply rose over time, but on the pc front I went through several dongles without success. Among them the eppfun AK3040 PRO MAX, which claims to be LE Audio compatible as well as the Creative BT-W6 for which even the Creative support gave misleading feedback before the purchase, only to admit it isn't compatible after I returned the device. -.-I was about to give up when I stumbled over an Australian company, Flairmesh, producing a bluetooth LE Audio dongle, the FlooGoo FM120. Since I needed to import the dongle to Germany, again I sent a question to the customer support: "Is it compatible with the Sony INZONE Buds?"Their answer really suprised me: "No", but they promised me to buy the Sony INZONE Buds, test them and publish a compatible firmware. And...well...they did, a few weeks later. Nothing more to it other than to acknowledge and praise what is EXCELLENT customer support, dare I say a rare thing these days. I imported the dongle, and it works.If I had to dig up any kind of critique for the FM120, it'd be that the process of pairing bluetooth devices is a bit finicky. Because there is a button on their software that reads "add device" and I was expecting it to show me a list of devices to pair, as when you use a regular bluetooth dongle in Windows or when adding devices with a mobile phone. Instead it will automatically search for and pair with devices that are in close proximity to the dongle.The software is not needed for (subsequent) pairing, or at all. You just plug the dongle it, use the inears and it works. But with the software you can change modes and codecs according to your needs, be it high quality lossless audio or low latency for gaming. Especially the latter is very impressive because it really is fast, making for no perceivable audio delay for the inears I tested.There is a limitation in the hardware or software, as in that an LE Audio device will always take precedence over any classic bluetooth device. This is a limitation by the current available chipset for LE Audio and other dongles (who weren't compatible in the first place though) have these notes plastered on their description pages as well. I tested several classic bluetooth headsets / inears (before I settled to only use the Sony INZONE Buds, as they are the best I have anyway) and when only these you can easily switch between them.All in all I'm very pleased with the whole process of aquiring the FlooGoo FM120 and it finally fullfills the task I've been looking for, for almost two years. :)

I needed a way to stream audio from my Windows 11 Laptop and MacBook Air to my Signia Active Pro IX hearing aids. My hearing aids pair and connect great with my iPhone, but not my Laptop and MacBook because the hearing aids support Bluetooth LE Audio and not Bluetooth Classic.So, I searched and found the FlooGoo FMA120. Using the FlooCast software, I configured the FMA120 to use Bluetooth LE Audio. Once I did that, I had to forget the connection between my hearing aids and my iPhone before was able to pair and connect my hearing aids to the FMA120. After they were connected, I was able to stream audio from my Laptop to my hearing aids and also participate in Microsoft Teams meetings using my hearing aids as my headset.The only issue I found was there is no way to quickly switch the connection from my laptop to my iPhone or from my iPhone to my laptop. When I want to switch from one device to another, I must forget the Bluetooth connection form the currently connected device and then pair and connect my hearing aids to the other device.So far, this is the only solution I have found to stream audio directly from my laptop or MacBook to my Signia Active Pro IX hearing aids.

Hard to pair with blue tooth Head phones. will not pair to my new Philips 950 Hearing aids .

This usb BT transmitter and receiver is probably in the top 2 of all the current available options. I don't like how you need to use windows to update the firmware, and the only place to get it is the windows store. There Python scripts from github should work on other os, for changing settings, but not flashing the firmware. The Python scripts may not be for the novice though. So while it's one of the best it does still have some cons that they could improve if they try.