Nilight - JK-61A 2" inch Rear Bumper Tow Trailer Hitch Receiver Kit, Compatible for 2007-2018 Jeep Wrangler JK 4 Door & 2 Unlimited, w/4-Pin Wiring Harness (Exclude JL Models)

Installed this on my '15 Wrangler JK—fit perfectly and took about 20 minutes. Solid build and the included wiring harness made hookup a breeze. Towed my small trailer with no issues. Great value for the price!

Simple to mount with the provided hardware, harness is very easy to install just plug and go! Built nicely and fits solid.

Perfect fit. Everything you need to install and go. Easy install 20 min max.

A very high quality hitch that came with everything necessary to install. Installation start to finish took me under 30 minutes.I didn’t remove the bumper cover, having previously glued the lock washer to the washer before pushing the bolts in from the back. Once the washers were on the bolts, I taped the nut to a 19mm open end wrench and slipped it up to the bolt. A bit tricky, but doable. Use a short 19mm socket on the muffler side of the frame rail.The taillight is taken off by removing the four Phillips head screws. Note that the lens doesn’t come off the taillight bucket, the entire assembly comes off. Unplug the wiring, connect the plug in the included wire harness, run the other end down and out at the bottom and reinstall the taillight. Carefully route the harness to the trailer hitch, avoiding the muffler. The included cable ties didn’t fit the existing holes in the frame, so I used my own. That’s it!

The product itself is great. Lined up perfectly with stock holes in frame. WHERE it goes is a bit tight, but that’s Jeep, not the hitch. Looks great on the JK and performs well.Would definitely recommend.

Came with all the necessary hardware and was overall pretty easy to install with the right tools and not needing to remove the bumper for access. Seems to be pretty sturdy and functional for most lighter-duty tasks. It also included the harness for the rail lights/4-way flat trailer plug! I forgot it came with that so that was great to see as well. It’s a nice fit and aligns nicely with the center of the Jeep. Overall a good value for the money! The light plug could be just a little better quality and a weight rating stamped or labeled on the unit itself would be nice just to quickly identify this hitch’s maximum capacity by design separate from what the Jeep’s factory capacities may be. Seems to be nice and durable for its design and I feel it would function within its rated capacity no problem.

Easy to install, put it in a buddies jeep with no issues.

Easy to install, and to wire up. Have used it for trailers and for bike racks. Solid.