VIVO Single Monitor Arm Mount for 17 to 32 inch Screens - Pneumatic Height Adjustment, Full Articulating Tilt, Swivel, Heavy Duty VESA Stand with Desk C-clamp and Grommet Option STAND-V001K

First off has all the tools needed to assembly which was nice. I'm sure it would have been easier with the tools that I have but I decided to go with what came in the box. Took me roughly about 15 minutes to assemble after reading the instructions. Once assembled though it was easy to adjust and set the angles that I wanted. It's range of motion is good to where I could set it perfectly to my seating position. Just make sure to tighten all the adjustment points before trying to adjust as it needs to be tighter than you think. the cable management is actually really good I was surprised at how easy it was. Just slide off the covers and route the cables. The quality of the parts is comparable to some of the higher end stuff out there, cough Fellowes. The price of this monitor arm set up blows me away at how cost effective this product is. I still can't believe how cheap it was for the quality. Size wise it's similar to any other dual monitor stand out there. Too be honest I wasn't expecting much considering the price but I was pleasantly surprised. It's a good product for what you are paying for and I expect it to last since I don't plan on moving my monitor at all.

Definitely worth the price. I bought the 3-monitor setup. The product quality is quite high, screw threads are machined very accurately, parts fit together like a glove. It feels like its price and has good instructions. Wasn't difficult to install, I did read the instruction manual but basically watched the guy in their video put it together and I followed along with the video. I'm glad they emphasized multiple times the necessity to screw the tensioner at least 10 times because it really does take that many full turns before the support starts to loosen up. The only knock I have on them is the fact that the tiny tension screws for both the top arms were not in the arms when they shipped. I happened to spot them at the bottom of the shipping carton so if you buy one of these, be on the lookout for them because they're very tiny and if you don't find them (or have them), you'll have to call their customer service. You'll probably spend more time adjusting the mount than putting it together, but that's where the fun is... tweaking it to your satisfaction. You can truly tension this thing to your liking. You don't want it to move... just torque it a little more. I have mine set to where it's fairly rigid, but I can tweak it a little if I want to. Range of motion... excellent for the two outer monitor arms. What I would love to see is a version of this mount where the center monitor is also adjustable in the direction towards the user. You can rotate it left and right and up and down but you can't bring it forward and backwards.

These monitor arms are super convenient and incredibly solid and strong. It’s given me tons of space on my desk while also matching my setup and being barely noticeable. Definitely worth the money; it’s reliable and solid, I trust it completely with my monitors. It has a super wide reach and it is super easy to move a monitor when needed.

I've only had this for about a couple weeks at this point (I got the white color). It is a bit expensive but it works exactly as advertised. It's saving me a TON on desk space, which is mostly why I decided to get it in the first place, since I have three monitors. It's built great and easy to put together. Holds my monitors well. NOTE: If you don't have a VESA mount on the back of your monitor (only one of my monitors has a VESA area to be mounted), then I highly suggest grabbing some mount adapters. I bought a VESA mount adapters for the HP M/5 series. Just make sure you check to see if it's compatible. Only reason this lost a star is because the arms on both sides don't go up and down. They only move left to right and it's really annoying that it's not an option to go up and down without adjusting the entire thing.

I have used quite a few monitor mounts over the past couple decades and I always go for budget mounts. At around $100, I would consider this a mid-priced mount, but extremely fair price for the pneumatic arms. The assembly is by far the easiest of any multiple mount that I have installed in the past. Take your time and follow the simple directions, will take 30-60 minutes. After having my desk cleared off, it took about 30 minutes to install mine. So far I really like the sturdiness. The pneumatic arms work extremely well, after properly adjusting the tensioners. Making all adjustments is fairly simple and easily reachable. I am becoming a bit of a Vivo fan boy as of late. I now have their desk, cable management bag, under desk drawer, speaker stands with desk clamps and under desk pc mount. Everything is great quality at extremely affordable prices.

Good product, as advertised

Works fantastic! Went together very easily with all parts I needed!

Fungerar som den borde. Bytte monitor arm då mina nya skärmar inte fick plats på den gamla. Enkel att skruva ihop. Håller mina 32" skärmar på plats på ett snyggt sätt. Om man måste hitta något negativt så kunde man gjort det enklare gömma kablar.

TL;DR version: I'm impressed. Rather fiddly to set up, with unclear instructions (video helped a bit), but it does everything I want it to do. Suboptimal management (cables need to run behind central pole), so came up with a workaround. Really sturdy - I've no concerns it will fall. Overall I'd say a 9.9 out of 10 but some room for improvement. I had very specific requirements. The stand had to have small leg-print (previous solution took up half the desk). The stand had to be very sturdy (safety top priority). The stand had to be clamped only (no drilling through my desk please). The stand had to be able to cope with a slightly tapered desk edge (so the clamps needed to be inset by an inch). The stand had to position three 24" (HP) monitors at the correct height (top edge equal to my eyes) and preferred angles (slightly angled inwards). I looked at every stand on the market (Amazon sells around 10 potentially viable options) and narrowed it down to this one and two others (HUANUO and BONTEC, with neither of which I was familiar, but nor had I heard of Vivo). Being Amazon, it arrived next day, which is always exciting. I unpacked the box and read, and reread several times, the rather poorly written instructions (hint: hire a decent technical writer). I eventually got the hang of it. It became apparent that for three 24" screens, it's not needed to use two of the arms (one on each side), but three. rather than five, were sufficient. In fact, with all five, the screens: (i) sat far too high on the desk; and (ii) had too acute an angle compared to what I needed. It was very fiddly getting them precisely into position but with micro turns of the allan keys, I was able to get it precisely into position, which looks amazing. The cable management system is not great. Cables show behind the main pole. I've put them in a sheath and used cable ties, but a cleverer system would have been to make the central vertical pole hollow so cables could be threaded through it. But I'm being very picky on this - my workaround works. The attached picture was taken before the last micromovements to level everything out out using spirit level. That took a couple of hours but worked well.

بشكل عام ممتاز لكن فيه فراغ بين القاعدة اللي على ظهر الشاشة والحديده اللي تشبك معها حليتها بورقه دخلتها بينهم

Solide et facile à monter

El producto es de muy buena calidad y muy fácil de instalar, no me tomó más de 10 minutos armarlo.