Jungle Jim's Mower Trimmer Rack – Universal Fit for Walk-Behind, Stand-On, and ZTR Mowers – Secures Trimmer for Transport – Lock-Ready for Theft Deterrence

If you’re willing to do a little bit of work in terms of drilling a few holes in your mower, this unit will work exactly as advertised. Took me less than 45 minutes to find the perfect way to mount it on my Toro Timecutter ZTR 50” (with no roll bar). Holds my Stihl string trimmer perfectly.

There are no clear instructions, but I understand why. There are so many different brands/models it would be 1000 page instructions. So let me help. This one is good if you have no ROP bar. You will need to drill into the frame to get it where you want it. Use two people and mock it up 1st before you decide and start drilling. Make sure you are clear of your controls in any position. I elected to put it on the discharge side but you decide what work best for you (just don't mount it perpendicular to the mower)

After finally getting multiple jobs in the same stop on a neighborhood I mow in, I decided to order this trimmer rack to install on my Wright Stander X 61" mower. Right out of the box, the directions were pretty confusing with minimal illustrations. I'm a pretty visual learner, and after careful reading, I was able to get some of this together, but towards the end, you really just have to figure this out for yourself. I understand that many stander style mowers are going to be different, so you'll have to do a lot of improvising. It seems like they give you what they think you'll need, but the amount of pieces and/or lengths actually weren't ideal for what I needed. The rear hanger (that holds the trigger part of handle) was clearly not going to go on my mower like any of the pictures had shown on the listing. There is a large (8 gal) gas tank on that side of the mower and really the only mounting surface is the left rear wheel fender. But for this to work, the hanger has to mount pointing directly off the side; There is no room for lift. So my trimmer doesn't mount at any angle like pictures show, rather exactly parallel to the ground. This isn't really an issue, but it's just an unexpected outcome to the project. What is an issue is that the rear hanger sticks too far off to the side, so it often snags on bushes and makes obstacles out of what should be easy to clear when mowing around close range to features on the property. Really the only way to fix this is to cut the mounting bar shorter so that it doesn't stick out so far - something I'll have to get around to when I have more time. Another issue (also with the rear hangar) is that my trimmer handle barely fits in it. It has a spring loaded feature on it, which in theory is a nice idea, except that the stopping plate only allows this to open so far, and I have to very carefully wiggle the handle of my trimmer into it instead of just a quick pull-and-snap shut action. It's a really tight squeeze and the handle of my trimmer seems pretty standard. It's a Husqvarna 525 LS. It's not a particularly beefy handle and I feel this part of the hanger should accept something of that size a little easier. One more issue I had, is that there is a rubber lined bolt on the front hanger that stops the front of the trimmer from bouncing out of place, and while mowing around a property, that bolt has loosened and fallen off, and so now I don't have that part at all. And this was only within 2 weeks of installing it. So all in all, I'm impressed that someone made something like this and in theory, it could work well, but I just haven't had the best experience with it and I feel like it has a few kinks to work out before it's really a great product that I would recommend to others. I will try to upload pictures when I can get around to it. UPDATE: The metal holding the spring loaded holster just broke and so now this piece cannot be mounted onto the mower. It lasted a few months with several issues I was having with it, and then it just broke altogether. I've gotten some things from Jungle Jims before and some of it I really like, but this design needs to go back to the drawing board and correct some things.

Easy to install product. High quality product. The materials used makes a durable weedeater rack. I maintain approx 7 acres at my property and this makes me more cut/trim more efficiently, by having my weedeater with me at all times.

I mow some large 2 acre properties and needed a way to keep my trimmer with me while mowing. This product was the solution. I did have to drill holes to install for my mower. It definitely speeds up the lawn care process.

This is a great product. You may have to move it around in adjust a little bit because all Mowers are not created equal but to show how tough this product is. I had a worker on a bank rolled my mower six times and it only bent the lower section of this product in just a little bit really tough product so thank you for creating good quality products like this.

Works great just have to figure out how to install it.

Price is insanely high for what you get. Not clear assembly instructions. Mediocre quality steel parts. Has shaved hours of my grounds maintenance routine by alleviating walking back and forth for equipment