KEMIMOTO X3 Clutch Cover Pin Kit, 11 PCS Quick Release Belt Tool Compatible with Can Am Maverick X3 2017-2025 Clutch Cover Gasket OEM Replace#715005045

These make changing the belt on the trail or in the dunes so much quicker. Dealing with the factory bolts is a PITA. Install can kinda be tricky getting everything to line up but these are definitely a must have next to a quick change belt tool.

No directions included but if you have any mechanical skills, this should not be a problem. I chose not to use the washers when riveting the lanyards to the cover (not enough rivet on the other side i felt). Take your time and figure out which direction your cotter pins should go before riveting the lanyards. The pins that you thread in are a little tough but i feel confident they will not come out, i used a small allen wrench to thread them in and just went until they the threads we all fully engaged.

This kit comes exactly like the picture. All of the items in a bag and that’s it. I installed this on a 2019 maverick x3 x RC turbo and in chassis. All of the items are nice quality like all kemimoto items, BUT getting the studs installed is not easy. I tried one by hand and with small tools. It wasn’t a fun time. I ended up putting the studs in a right angle drill, tighten the chuck snug and this worked best. You can then adjust them with a small punch through the hole. The fitment is good, just make sure your studs are straight during installation. Definitely makes it quicker to access your clutches and belt, all you need is a screwdriver to loosen the hose clamp, pull the clips and the cover is off.

easy install and went on with in about 15 minutes they feel very durable and look great

I wish it came with type of install tool to help tight them. I used a small screw driver to place in the small hole of the screw to tighten them in. I think it needs a washer between the cover and the pin to help seal better so water don't get in. Other then that not to bad to install and rivet the on the cover. Fits well on 2020 Canam X3 RS Turbo

Threads were larger than stock. 2017 can am x3 DSX. Could be made to fit but the belt cover can't be removed without removing the shock because of the studs sticking out on the smaller wheel base X3 DSX. It's 66 inches. Really hard to install due to different size threads and had to install the cover multiple time to adjust depth so cover would be tight. I only used a couple of them because some of my factory bolts were missing. Trashed the rest. I do not like for wet enviroments like HMT in WV. If you want them to be as tight as they should, the cover should be squeezed with pliers at every pin on reassembly and that's a pain.

First off there are no instructions. Granted if you buy this set you already know you are at least slightly mechanically inclined enough to figure it out or know someone who is. Next description says black rivets which cool they will blend in but they are not black. I ended up using a 4.0 rivet and larger washers because the ones sent seemed so danty. If you don't own a rivet gun buy or borrow one they are same price as this set for a cheap one. The WORST part of this set is trying to screw the pins into clutch housing. I started by just using Allen wrenches to turn til tight. Then put clutch cover back on but pins were still really far out tried tightening more with Allen wrenches after breaking two smashing my knuckles I ended up drilling through a socket and cut an Allen wrench to fit in as a key (see attached pic of set up in use) with clutch cover on I used set up to tighten as much as I could then removed cover and had to use set to make 1 full turn on each to make sure cover would hold tight and seal properly. Right after I messaged a friend I ride with he said another person we ride with has tried these and they ended up loosening up and letting water and dirt into housing. I don't feel like I'll have that problem being my cover is pretty snug but it was a task to do so with no tool or instructions on how to. Just gotta wing it.

Works great. Makes maintenance and belt changes quick and easy