CRJ 15-Pin SATA to 2 PC Fan Power Adapter Cable - 12-inch (30cm), Black Sleeved - Power Up to Two 3-Pin & 4-Pin Computer Cooling Fans from an ATX 15-Pin SATA Power Connector (12V - Full Speed)

I had just finished building my sixth gaming PC. Using the MSI Z790 MAG Tomahawk motherboard the MSI MPG Velox 100r, I had a case fan wiring issue. The case fans and their wires were not the problem, the snag was the location of case fan ports on the mobo. All fan ports (except the exhaust fan) were at the direct bottom of the mobo. Using the two fan splitter helped but I was still left with a mess of wires. After doing a quick bit of searching, I came upon this. I was unsure but decided to give it a try. Best case it would work like a dream; worst case it was defective. Turns out it was best case after all. I connected all four case fans to the splitter, then connected it to an extra SATA cable port on my PSU. Wires are managed behind the mobo with all the wires and my fans are doing fine. I’m already happy with this so I ordered a two fan pin splitter. I’m getting ready build a friend his PC and that splitter will come in handy for his 240mm AiO.

Nice sheathed power cables, working perfectly. They're full black so they look great in my PC. Just know they don't have PWM control, so the fans connected to it will be spinning at full speed.

I have a gaming PC that has a custom setup where the fan and RGB lights are all on one connector. One of the fans was getting noisy. I bought this cable and 4 pin fans VIOLA no fuss install and no lights (not a fan of the distraction they have for where my PC is located.

Lo compre para un ensamblado que tenia y al ultimo momento me di que no era necesario, ya que los ventiladores vinieron con algo parecido. pero paso el tiempo y resulta que lo use en otro ensamblado y todo perfecto. funciona muy bien

Worked as promised and was the fix for extra fans in my newly built pc since my motherboard only had 2 fan ports, it is slightly loud since the fans are always running max speed, i don’t mind it just need my system to be cool and with plenty of airflow

Nice Braided cable perfect for lian li lcd fans cuz they require 12v power, worth the money

I got this to power two 12v m.2 heatsink fans in my rack mounted Dell server. It works as advertised. I’m powering two little fans with it.

I absolutely love these cables versus the same type of cables with just the bare wires. The inside of your case will look a lot cleaner with these black sleeves around the cables and the sleeves also help contain the cables to a smaller area as if zip-tying. One thing I didn't expect but was very glad to see when I got the cable was that the leads to the 4-pin fan connectors are quite long. I was expecting maybe 6 inches but what I got was basically double around 12 inches. I was planning on needing to use my 4-pin extension cables, but once I received this cable I was delighted to see I didn't need to! I highly recommend this adapter cable if you're looking for a fan power solution like this.