KRAUS Kore 30-Inch Drop In/Top Mount Workstation 16 Gauge Single Bowl Stainless Steel Kitchen Sink with Accessories, KWT310-30

We replaced an old ceramic double sink and really like the large, single-bowl style. My wife wasn’t sure she wanted the single bowl but quickly realized how much more functional it is. She loves it now. Being in the remodeling business, I ordered the brand and guage we use, Kraus 16-gauge stainless. We have trusted Kraus for 20+ years and have never, to my knowledge, been disappointed. When researching, I saw some comments about other cheaper brands’ stainless finish starting to rust or stain after a short while. I’m grateful for those reviews. The dual-mount style can be installed as a drop-in (top-mount) or under-mount. This was important because we will redo our counters and cabinets in the future, and I want to use the same sink to save money when that time comes. The sink was quite easy for two people to install. We like the look. It added a nice modern look to our kitchen. My wife liked how Kraus designed the sink strainer with a large stainless disc that covers the black rubber of the garbage disposal guard all the time. It gives the sink a clean, finished look. The cutting board and the drying rack were the bonus. We keep the cutting board nearby and use it frequently. It saves counter space—very helpful in our small kitchen. The drying rack is useful for saving space, too. We keep it on the sink at all times and roll it up toward the side when we need the full sink bowl. I would definitely recommend the sink. The Kraus reputation, the look and feel of quality, the tasteful design, and the accessories made it the perfect deal for us. P.S. After a few weeks of use, we found that the sink cleans very quickly, too.

This sink met and exceeds my expectations. Easy to install with correct adhesive. Finish is exceptional - easy to clean, internal drain slope works great. Insulation and sound dampening is up to par and design with drop in work board is very functional. Excellent product. Will recommend this product.

We chose this sink for a remodel in a small galley kitchen and it worked out great. This is a gorgeous product with 16ga steel and should last a very long time. I especially appreciated the fact that the drain is offset to the back right corner as this left the cabinet space below significantly more usable. While it seems a bit pricey, I believe it to be a good value for the money. The one caution I would give is that the 30" we chose was a very close fit in the 33" rta sink base.

This sink is exactly as described and shown in the description. I chose this "drop-in" sink to insert on top of the cut out in my new granite countertop. My former sink, of 10 years, was under the cut out, so to replace it I had to get new countertop. I really like this sink, it's easy to keep clean and just like nice. Now, years later, if i choose to replace my sink I can easily do so by just purchasing a new drop-in.

replacing the old sink was a no brainer . the old one wore out after 45 plus year old. it was in desperate need of being replaced. glad i made that decision to upgrade to this new deep single bowl sink. easy choice it was for me. i got what i thought was the right choice to put in my kitchen. we love this whole sink set up that i chose to get and have my plumber buddy install for me. this was the best thing we’ve done to allow us a better and more efficient sink that more modern than ever. the whole sink system with the inserts for a cutting board and vegetable colander style drain pan. and we’ve got a drain rack also for this sink. we love what was chosen for our purpose and everything is just perfect for all we needing.the faucet style works the way i’d like to have a faucet do it’s job . it’s nice to have in all aspects in our uses. i will not regret what we have now. it’s perfect for all we have.. id recommend this sink for anyone who is wanting the most useful and amazing sinks i’ve come across. it’s perfect for us personally. the amazon commercial disposal is priceless to use with this sink too. a 1horse motor will make bones disappear in seconds. but i don’t recommend putting those down the drain under normal circumstances . we had one go down by accident and found it was gone without any problems… just saying, it will chop up bones .. this combination of items i used works the best for all our uses.. we love this whole set up!!!!

I ordered this to replace a rusted American Standard cast iron sink that had considerable rust. It was in a corner at 45 degrees to the cabinets, so space was very limited. I spent a lot of time carefully researching and looking at the specs and knew this might require a slightly larger hole, but it was close. The actual sink needed about an inch in each direction more space than the spec had me believe and it ended up being a lot more work than I expected. But it was so worth it. Because of the tightness of space it was impossible to use any of the clips that anchor sink to the work surface. The two stone worktops that meet in the corner were not perfectly horizontal and so it was impossible to get the sink perfectly flat, but silicone sealer helped minimize the rocking. The sink is very rigid. With very careful planning I was able to open up the hole with an angle grinder and the result is beautiful. My wife is so happy with the result she said “Now I don’t need a new kitchen!” making this the best $300 I ever spent! It’s perfect with a Kraus Oletto High Arc pull down sprayer. Also choose a Kraus disposal since the old unit was over 20 years old. It was impossible to use the mount clips due to lack of space. If your worktop is perfectly flat this won’t matter. This was my first sink install. If I were doing it again I would not apply silicone sealer to the sink per the instructions, but would apply it to the counter. This ensures the sealer is in the right place and also gives you something to hold as you lower it into place. Very Happy Wife, priceless!

Very happy with this sink so far. Had it for a few weeks now. It looks amazing and feels very robust. I found the mounting clips to not be the greatest but they did the job. The sink itself is so thick and heavy that it weighs itself down quite well. One other thing to keep in mind, I installed this on a laminate countertop. Due to the weight of the sink, the sides in the centre of the sink don’t sit perfectly flush to the countertop. I don’t think I can fault Kraus for this issue, it’s just crappy, weak, bowing laminate. I was able to remedy this gap with a bit of extra silicone caulk. Don’t let any of the negative reviews deter you from buying this sink. My friend is a plumber and he said that usually the less expensive no name brand sinks have quality control issues and don’t fit properly or come out of the box already damaged.

I purchased this sink collection via amazon and was very careful to ensure that ny tapwear and additional bowls and chopping boards etc would be also aligned with the measurements of this sink. It was installed as an overmount system, by professional builders. It looked great from day one, especially with the industrial sink and additional collander and chopping board bits. However, as this was the first experience using a high quality gourmet sink, I wanted to be careful that I followed in structions about cleaning and maintaining this sink and its accessories, as I wanted to keep this sink for many years ahead. 1) Cleaning: As it said in the manual, to clean the sink, use a small amount of dish liquid and wipe down with a soft cloth after each use. What it didn't say to do is how to manage heavy loads and the necessary scratching that comes along when washing dishes after a whole family have eaten, or what to do when all the baking trays and oven trays are (seemingly) hardier than the sink is. My sink is now left with lots and lots of scratches and bumps. I am not sure a) how to get these out; and b) if this us just the quality of the product I bought. 2) The quality of the sink itself. My plumber, after putting in the sink, said he was a little concerned that hot water condensation from the sink was quickly forming on the underside of the sink, pretty much whenever the sink was used to contain any water or food containers tht were hot. The bottom of the sink, and surrounds, is not insulated, and then a problem of damp and mold started in under the cabinets frtom my sink. I asked my contractor if I should put in extra insulation to stop the leaking hot water that had now gotten all in to the pipes and floors anduer the sink; but was recommended that wouldn’t be much help. I tried to call Kraus at the time to advise but I was unable to reach anyone with expert advice. In any event, you can see how the sink's lack of insulation has caused all this flooding/damage to the base of my kitchen floors. The final thing I want to say is that I splurged on the idea of this sink: that could help central all the ADHD'ers in the house and give us joy and focus as we had planned our stations so well....however as things got broken (refer to the salad bowl holder), and our base sink seemed to frighten us with its gentle constitution ("don't scracth me!" to the constant dripping of hot water below in to the cabinets) led to all those pockets of rust, I have had a really sad experience with this product. And i know I might sound flippant, but this is my first home and renovation .... I was very sick and wanted a place of my own to gather and show family and friends what could be done if you do your research, and invest in some fantastic designers. I still think KRAUS are amazing at what they do... but maybe this product in particular was a dud. I would absolutely love to talk to someone from the KRAUS team about what can be done to restore the sink itself to its previous condition; and whether anything can be done to replace the broken additional parts. I’ll be reaching out to Amazon customer service for help: I am really hoping to rectify this problem.

this sink adds an instant update to a tired kitchen. easy to install and it looks stunning!

Sink was bent and uses a weak clip method to clamp to the countertop. Would not recommend

Seems well made and good quality, but it's not straight, one corner is crooked and my contractor was unable to install it. Will be returning it.