DYMO Embossing Label Maker with 3 DYMO Label Tapes, Organizer Xpress Pro Label Maker Starter Kit, Ergonomic Design, For Home, DIY & Crafting

I love this little label maker. The labels are just freaking adorable.The bad reviews are in my opinion mostly user error. Except of course for the ones where the machine is broken.Once I select the character I want, I use both hands to squeeze the trigger and hold for a couple of seconds before releasing and the embossing comes out very nicely.-The labels are definitely on the smaller side, smaller than I thought but they still work great for labeling smaller items. If you’re labeling larger things you might want to spring for the larger model. Or even if you’re just more spendy than me, the larger seemed too expensive for me.-The labels have really good stickiness. It takes me forever to take the back off but that’s because I have very short nails and very bad coordination.-It doesn’t feel sturdy. The label maker is very lightweight and feels cheap. If I dropped it on hard flooring I think it might break altogether or maybe that the back cover where the tape loads might pop off for good since it feels delicate. For the price I don’t mind, I don’t expect it to last forever and when it does break I will buy another one.If you look at my SAMPLE 1 in my pictures you can see that you should definitely put a space AFTER your last character or the label gets cut too short.If you look at SAMPLE 2 you can see that white shadow on the upper left corner. If you don’t want that marking on your label, put a space BEFORE your first character and AFTER your last character.If you look at SAMPLE 3, you can see it’s not as clearly embossed as when I use two hands to squeeze the trigger.

I love this thing. We had one when I was a little girl, in the late 70s and my teenage siblings labeled everything with it. That original one is still kicking around and still works! Here we are about 45 years later and I know all the digital label makers don't last. It's cool you can print icons and stuff, but sooner or later they fail, or the software doesn't work, or you can't get the sticker for them anymore. So when I needed a label maker I thought about it and realized I was going to be happier with this vintage analog (meaning it LASTS) label maker. But then I pulled it of the package and it wasn't working! It has a lock mechanism. ***YOU NEED TO LINE UP THE ARROWS ON THE UPPER AND LOWER ROTATING DISCS to engage the embossing an cutting action.***

This label maker worked very well at the beginning, for about an entire roll (photo of red label as an example). I managed to label everything I needed and wanted to, so that's good. But now it just messes up every time I try to create a label. The letters don't get embossed, and if they do, they're out of alignment (see the photos with the black labels). I don't know, maybe it's because I was squeezing the trigger to hard or something. Or maybe there's a piece of debris stuck in the mechanism. I think I'm just gonna spend a little more for an electronic label maker next time.Update: I managed to fix my Dymo labeler. It's not because I was pressing too hard. It's because it's badly designed with cheap parts. I'll explain. You have to remove the two screws at the bottom and then remove the entire "head" of the device (the rotating cassette of letters). It'll be tricky, and you'll have to slightly pry the handle apart a little bit, but it can be done. Inside, you'll find the little plastic hammer that pushes up against the letters. Every time you squeeze the trigger, the little plastic hammer pushes up against a letter to stamp your label. Now, each of the letter stamping pieces is not a solid piece. It's hollow with a cross brace inside of it - and it's sharp. The reason why this thing fails after a certain amount of use is because every time the hammer makes contact with a letter stamping piece, it pushes up against the cross brace and the edges of that letter piece, and because that hammer is just malleable plastic, it WILL get dented and deformed (see my "deformed plastic hammer" pic). Then with every squeeze of the trigger, the plastic hammer will deform more and more until it no longer pushes evenly against the letter, and the letter stamping pieces basically just slip off of the hammer pushing up against it. This is why it stops stamping letters properly, and why sometimes the letters are out of alignment.To fix this, you'll need to fix the plastic hammer. I personally filed down the chipped and dented head and then attached a tiny piece of rubber to it. Make sure that whatever you're attaching to the hammer is thin enough though. The cassette of letters still need to freely rotate above it. But as you can see in my example pic, it's all fixed again.So, it works again, and the labels are all coming out correctly again, but I'm still giving this thing two stars because it's built very poorly. I would've given it a one-star, but when it works, it's cool, and it's at least easy-ish to fix. But I shouldn't need to crack this thing open and MacGyver a fix for it. The letter pieces should've been solid pieces instead of being hollow and having that sharp bracing support in it that damages the plastic hammer. The plastic hammer should've had a rubber or metal piece on the tip to reinforce it and prevent it from being damaged. Sure, this thing will probably work for you through an entire roll, maybe two, before it fails - and it WILL fail. But unless you're comfortable with fixing this thing when it does break, I'd seriously consider something else.2022-03-27 Update:My fix to print letters is still working, but the cutting blade on this label maker has completely dulled, and I still have another roll left. It doesn't cut anymore, and I didn't even go through two rolls! This product is terrible. I'm knocking it down to 1/5 stars. If you want a long-lasting label maker, go look elsewhere and don't cheap out. This thing sucks. Cheap materials destined for the landfill!

The DYMO Embossing Label Maker is a simple, no-battery tool that’s great for home organization, crafting, and DIY projects. I use it for labeling storage bins, spice jars, and office supplies, and the embossed labels look clean and retro.Pros:✔ Easy to use – Just turn the dial, squeeze, and print.✔ No batteries needed – Reliable and cost-effective.✔ Labels are durable – They stick well and don’t fade.Cons:✖ Takes effort – You need to press firmly for clear letters.✖ Limited font options – No customization like digital label makers.Final ThoughtsA solid label maker that does the job well. It’s fun to use but requires a bit of manual effort. If you like simple, embossed labels, this is a great pick!

Old-school crimp label maker works well and comes with three rolls of tape. Good for everyday use or for projects needing “retro” look. Reasonable price also. Highly recommend…

I thought my handwritten labels were pretty cute, but I decided to make the upgrade and wow. This label maker is the definition of aesthetic. I feel like a hot 70s queen using this thing. Why is it so cool to make an analog label with my hands? Why is it so satisfying to click around on the dial? It takes a few tries to get the hang of it, and it's a bit of a workout for your hands, but the labels are worth it. I wish I had more things to organize.