AUBESTKER Handlebar Kickstand Kit for Segway MiniPRO Ninebot S MiniLITE, Relieve Knee Pressure Speed Control Non-Electric Balancing Rearview Mirror, Upgrade Accessories for Safety Segway | Fun Segway

Easy installation and well put together. I like that it fits like a glove a glove and no more tipping over when turning off. You can mount it on either wheel but for charging I recommend putting it on the left wheel.. I am showing a picture without the kickstand. The two holes is what the red kickstand bracket screws into. It's that simpleUpdate: After going about 30 miles the two nuts came loose on the kickstand I recommend buying locknuts right away so you don't lose your kickstand-or putting locktite on the bolts. The size of the bolts is M8 for the lock nuts if you want to buy them now. You will need two of them

I know one star is a little harsh, but this is a completely unimpressive handlebar, and it is unsafe. It deserves zero stars and a do not buy logo. As mentioned by others, there are absolutely no instructions, the holes do not fit the screws they send you, but if you are mechanically inclined, you can get it easily installed within 10 minutes. That is assuming, you know how to get the old knee bar off, which is very tricky. I promise you, you will struggle with that. Anyway, my biggest complaint with this handle bar is that it is forward heavy, meaning, when I step off the nine bought, it rolls slowly forward. No amount of recalibrating and adjusting the tilt with the application on my phone have overcome this. So, the handle bar was difficult to install, because it was undocumented and not machined well, and it is designed poorly to be too heavy forward. But, if you can deal with those, it is definitely fun to ride with handlebars instead of knees only.It’s a typical quick mass Chinese import product. No real finesse to the handlebar. Just, Expect that this product will underwhelm you, but function, bottom line.Update after two weeks of use: THIS ITEM IS UNSAFE AT ANY SPEED!!! Do not buy!!! I was concerned from the beginning that the connector from the handlebar to the mini pro is plastic, but it seemed sturdy enough. However, today I stumbled and tried to correct myself on the handlebar and it snapped right off, and my legs were tangled in the scooter and steering pole. I fell hard and broke my shoulder. This would not have happened if I could trust the rigidity of the handlebar, but it snapped right off. I am a tall man, but not heavy. I’m 5’11”, 165 pounds. Athletic. I fell and now I have an injury because of a cheap plastic control arm instead of aluminum. Really no excuse to sell this junk. It is unsafe.

First this is a must have item for all Mini Pro owners. I've been wanting to get one and saw this n jumped. Quality is very good on this kickstand there are very cheap ones this is not one of those. Extremely easy to install about 4 minutes. The added tool to install works good but use a regular screw driver to firm it up tight. So if you own a Segway Mini Pro then grab this asap and stop leaning your foot ride up against the wall.

This is one of the item that you should buy if you have a mini pro. A slight nick will trip Segway when it is powered off and I don't want it to lean over the wall as it could eventually scrape the knee foam of the pole (joystick?). So I went ahead and bought this on the next day. Not sure why Segway did not include this in the product itself. Nevertheless get this if you have a mini pro.Also, as other reviewers mentioned, you might want to get a locknut to lock the screw as it might wiggle its way out. It's less than a $2 purchase. You can get it in any hardware store. the locknut size is M5. Happy riding!

Let me start by saying that I definitely recommend getting a set of handlebars. These will make your Segway safer to use, impact your ability to overcome obstacles and will allow you to travel longer distances without getting as tired.However, after purchasing three such products, I decided to return this one because I came to the conclusion that it has drawbacks I'm not comfortable with.Issue #1 - Another reviewer noted that the product didn't come with instructions and this is true. Installation is mostly self explanatory but I too experienced some problems and wished I had a manual.Issue #2 - One of the other products I purchased has a curved base, this one doesn't. The curved base is critical because it places the handlebars just forward of the foot rests but not too much so. Lack of the curvature pushes them to much forward which requires the user to lean more forward and is therefore less stable.Issue #3 - Rattling handlebars - the handlebars are held together to the vertical post with spring-loaded pin. This set up is expected to rattle during use in an otherwise very quiet means of transportation.

Though it does not come with instructions, it is easy to install. Easier if you do a quick YouTube lookup. It is a solid kickstand to hold the MiniPRO upright when the power is off. I chose to add lock washers for the kickstand mount to its bracket. I noticed a slight imbalance of the MiniPRO tilting forward. With recommendations from others, I used the calibration feature of the app the rebalance the MiniPRO.

The AUBESTKER folding kickstand is OK! What is not OK is the complete lack of instructions, the lack of quality fasteners and the poor quality of the red bracket.No instructions? Yes, once you fiddle with it you understand how it should mount, I get it, but all products should have instructions!Quality Fasteners! The quality of the fasteners is questionable, even the two large screws seem to be different sizes when they're not. The kit should also include or recommend using loctite blue.Red Bracket. The red bracket looks sturdy enough for the kickstand. But the quality is questionable. I had to drill out one of the mounting holes to hold the kickstand onto the bracket. The hole was too small for the screw.Great idea but poor execution.

Keeps the unit upright if the handlebar extension mod is retracted...otherwise it's much more likely to tip over.Needs to be on the front and the rider's right for the unit's proper foot placement. I didn't get an instruction memo so there was bit of time used to check placement.Was concerned how it would attach...but not to worry. It uses two holes native to the unit.