Sellstrom Single Crown Safety Face Shield with Ratchet Headgear, Clear Tint, Uncoated, Blue, 8" x 12" x .040, S39110

Firstly, face shields are better than cloth masks, but shields were reserved for First Responders PPE and rightly so. A couple of weeks ago I saw that the general public could now purchase Selstrom's face protection. It is a good product - if you put it together correctly. The plastic shield has a protective bluish covering you have to remove but it's hard to get started. I started at the attaching holes and finally got it removed. The shield attaches easily - if you start with the correct end. Start with the largest slot first - after you've slid the end under the blue headpiece. The holes diminish in size as you work around the front of the headgear. Then slide the final end under the blue headpiece and you're done. It is lightweight, comfortable, not as constraining as a mask, but in some situations use both. The only negative is that Selstrom does not include instructions to assemble. It took me a while to figure out, but once I did it was easy to assemble and works great. Stay safe people. EDIT: Looks like pictures did not stay in the order I uploaded them. I don't think I can change the order so I hope you can figure the sequence yourself.

Good cover on the front of the face. Protects from saw dusts or sparks from the front. Doesn’t do that great around the sides. Visibility is really good, you can see through clearly. Enough room between your face and shield so doesn’t fog up as much. Fits well. Comfortable to wear, adjustable strap to fit different size heads.

To be honest, I purchased this item because I really don't like the cloth face masks. I don't put this product to the rigors of a machine shop. I like that this face shield has so many available adjustments. Between the headband and crown strap, the shield can be adjusted to fit well. It is well-balanced so I can easily lift it out of the way to eat and drink. It is easy to clean and does not scratch (again, I am not particularly hard on it). I have found that when I have the shield too close to my chin, it can start to fog but all I have to do is pull it out a bit and it clears on its own. My one difficulty is that the headband is not terribly comfortable where it meets the forehead. The cushion is between two flat pieces of plastic fused together leaving a sharp seam. Enclosing the cushion in a plastic tube would create a rounded edge that would be more comfortable. Still, the edge of the cushion is only an issue if the shield is worn for a long time (such as grocery shopping).

We bought a cheaper version of this than we could have because we have limited need for it, but it was in good shape when it arrived and it works exactly as expected.

Excellent quality and exactly what I ordered.

So I got this sheild to work in the COVID unit with while I am at work. First off... While slightly confusing to put the plastic sheild piece on, it DOES go on if you put it the right direction. I see alot of people complaining about the holes but it just slides over in place. The sheild held up for a while. However the plastic sheild where the holes are at have broken already. (I've only had it for about 5 months). The main problem with this mask is that the sheild itself isn't shaped to the headpiece. So the corners kind of stay straight and stick out. I even taped them in place but eventually they would pull out. Now it is broken. Yes I know I can buy another clear plastic and replace it however I really don't feel like paying to replace it every 6 months when I can just purchase another brand that won't do that to me. Overall like I said it offered good protection for a while. It's not a fantastic sheild but im sure it isn't the worst either

It is what you paid for.

The face shield comes as a flat piece that clips onto the head piece. The shield is very flimsy and pops off the mounting tabs often. Fine for use to block dust but seams way to light duty to protect me while using my wood lathe

Excelente calidad-precio

I use this protect when i use my gas trimmer. This shield is way better than using protective glasses and I found glass fog up. The face shield works great.

The product is excellent. It's fairly light-weight, comfortable and easy to see out of. The face shield is large, so I feel well protected behind it. Overall, I'm very happy with it. However, it really, really needs assembly instructions. First, the shield is hard to put on the headpiece. What you need to do is move from the longer holes in the shield toward the smaller one, sliding each in turn so that the next hole lines up. I noticed a lot of people saying that the holes don't line up. They don't. You need to make them line up by putting the holes on the tabs one at a time. Also, the shield has a thin, translucent blue plastic film that needs to be removed. It's not at all obvious how to take it off, so you need to pick at the film at the corner. When it first arrived, I thought it was just low quality, but there's actually a piece of plastic film stuck to it. Boy, does this product need instructions. I noticed several people saying they were going to return it because of the above problems. Once assembled though, it is excellent.

With the pandemic, all faceshield's price skyrocketed, this one remains a good ratio of a good product that doesn't cost an arm, not the ultimate faceshield on the market but a good one for the price. The downside about this product is the confort as it is not very foamy on the forehead, tough for a quick job that doesn't really matter.

I'm a delivery driver for produce and need to wear a mask or shield. I can't get enough air in a mask and the shield work provided was inappropriate for working. This stays on my head. Need some anti fog tho. Also a little pricey but I wanted it quick