Sekizo Yanagiba Sashimi Knife 210mm

Not at all sharp

Le couteau viens pas pret, non tranchant, il faut quand même l'aiguiser correctement, une perte de temps que personne ne me paie, 20 € pour cette couteau semble cher mais le acier est japonais et de bonne qualite

awesome thank you!!

I think this knife is a good value if you want this specific kind of specialized knife. You might want to know that I'm a bit of a sharpening geek, and I spent some time getting the edge just how I wanted, but now that I have it slices like nothing else in my knife drawer (of about 20 knives). I'm not sure I would be this satisfied if I hadn't known how to resharpen the edge to my satisfaction. Others have noted it doesn't hold up to multiple re-sharpenings which I'm sure means they haven't known how to restore the edge properly. The steel is just fine. It's not super high-grade knife steel perhaps, but it takes a keen edge just fine and holds up when ground at the right angle. I'm sure it's not for everybody. I'm not sure how long the factory edge would hold up without some loving care. And it's a very specialized knife, really optimized for slicing fish into sashimi-sized slices. But I wanted to try out this style of knife and the next price point for a knife of this style was about $100, more than I wanted to pay to experiment. For those who might care about the sharpening details, I started by flattening and then polishing the back to 2000-grit (actually just the edges of the back get flattened and polished since the back is hollow-ground). This is a must-do step to get a really keen edge since the edge is only ground on one side (like a plane iron). Then I trued up the primary grind on the other side to 15 degrees (seemed like it was about 17 to start), then put a secondary edge at about 20 degrees when the 15 degree edge wouldn't hold up very well. With the secondary edge polished to 2000-grit, the edge cuts (slices, not chops) extremely well, better than any knife I've ever used, and seems to be holding up well with a gentle (ceramic) steeling before each use. I feel like I have a good feel for this style of knife now and might invest in a higher-end model later if the spirit moves :) Do note that this knife is shorter than described and as it appears in the picture. The blade length is 200mm, not 300mm, and the overall length of the knife, including handle, is 320mm. Knife length is properly described by the length of the cutting blade, not including the handle.

I have read several fair reviews, and they are mostly positive, but owning several of them, I feel compelled to point out a couple of oversights by other reviewers. Firstly, I have read several reviews that describe some of the knives as being "too light" or "less sturdy" than others of the same type. They are indeed substantially lighter than many knives of similar style, BUT this is a positive for those folks who actually know how to use a knife. I'm no professional chef, but I know how to use a knife for cutting. These knives are razor sharp, and hold a good edge for a long time when properly used and cared for. They also sharpen relatively easily. That said, if you are looking to cut through bone, get a saw or a cleaver. These knives are designed for cutting flesh and vegetables, not quartering a steer. If you use these knives for cutting up food, they are wonderful. If you use them to chop down walnut saplings in the back yard, there are other, better knives. Think of them as surgical instruments, not hatchets, and they'll serve you well. Secondly, the handles are raw wood. When you get the knife or knives, buy a small can of polyurethane and simply dip the handles and then hang the knife point up, allowing the excess to run off onto a newspaper. leave the knife hanging for 24 hours to allow the finish on the handle to cure. Steel wool the handle lightly with 0000 steel wool, and repeat the dip-hang-cure-steel wool process to get 3 or 4 good coats of polyurethane into the handle. This brings out the beauty of the wooden handles and toughens them considerably as well. It also prevents oils from hands or foods to build up in the wood's grain. I did this to the first of these knives I bought 4 years ago, and the finish is lasting and makes the knife cleaner as well. Lastly, hand wash and then hand dry these knives. They are not for the dishwasher. the hidden-tang handles hold moisture against the blade's tang and will eventually corrode even stainless steel (which is really stain-resistant, not stainLESS). Oil them occasionally with a drop of mineral oil, and sharpen as necessary. With a little care, these knives will be among the finest you own, and after acclimating to the different weight and balance of them, they will quickly become your favorite knives, lasting you for many years.

För den som gillar rostfritt en helt OK kniv med helt OK skärpa. Den låg bra i handen. Dock skickades den tillbaka då jag hellre ville ha en kolstålskniv från "Autenticitet blades" - vietnamesiska knivar som rostar, men är mycket skarpa.