BTF-LIGHTING FCOB COB LED Strip Flexible High Density Uniform Light 9W/m 16.4FT DC12V Natural White 4000K CRI 90+ 8mm Width Dimmable LED Ribbon for Indoor Decor(No Adapter or Controller)

I got these lights for my 3d printer because i wanted to be able to hook them up without using a converter and the lighting output on the printer is 24v. The strips were easy to cut and solder wires to for connectors. They are also brighter than expected. I have been using them for about 6 months now and they are working well. Lighting was a must for me because my printer is in a shed with poor ambient light and I sometimes video my prints for social media. The sticky-back made them easy to install and is still holding up after about 6 months of switching between hot and cold in the chamber. By plugging them into the printer's light port, I am able to control them with the computer that runs the printer. I would definitely recommend these if you need 24v white lights for a project. I also hooked the part of the strip I didn't use for the printer and place it on a shelf above my desk with an old 24v power supply I had laying around to light the desk better.

I recently purchased this LED strip for a lighting project, and I am delighted to share my positive experience with this product. From start to finish, it has exceeded my expectations and proven to be an great investment. First and foremost, the LED strip was exactly as described. The specifications provided by the manufacturer were spot-on, and the product matched my expectations perfectly. The brightness, color accuracy, and overall performance have been on point, , contributing significantly to the ambiance of the space. One of the standout features for me was the aesthetics of the LED strip. The lighting is vibrant and even, creating a visually appealing and immersive atmosphere. The adhesion of the strip was another positive aspect of this product. It adhered securely to the channel without any issues, and the included adhesive backing proved to be reliable. The installation process was hassle-free, and the strip has stayed in place without any concerns about it coming loose. Considering the quality of performance and the pleasing aesthetics, this LED strip offers exceptional value for the money. I have found it to be a cost-effective solution without compromising on quality. Additionally, I have not encountered any performance concerns so far. The longevity and reliability of this product are certainly reassuring, making it a wise choice for anyone looking to enhance their living or working space with quality LED lighting. In conclusion, I highly recommend this LED strip for its accurate description, impressive performance, and overall great value. It has truly elevated the lighting in my space, and I couldn't be more satisfied with the purchase.

This LED strip is fantastic! The lights are bright, the colors are vivid, and it’s very flexible for different installations. The adhesive backing sticks well and makes setup quick and easy. Considering the incredible price, this LED strip is a great value for anyone looking to upgrade their lighting. Highly recommend for home, office, or DIY projects!

You'll need to order a 12v supply separately and may need to solder depending upon your application, but these are great if you know what you're getting into, and are priced accordingly. I used this for under-cabinet lighting, and already had 2 conductor wiring stubbed out under each cabinet. I cut this to length, and soldered directly to the LED strip. I am very happy with how well this provides diffuse light, which is a big improvement over similar strip with exposed individual LEDs. I prepped the surface with rubbing alcohol, and had no issues with the adhesive, just make sure that you anchor the wire so that it doesn't pull the end down, or use the included fasteners on the end.

Beautiful lighting...! BUT... the adhesive backing is barely acceptable. I'm using the LED strip around a kitchen pantry door frame, i.e. stuck to typical kitchen gloss wall paint. The adhesive goes on good at first, but then it lets go buy the next day. I've ordered some 3M VHB tape to resolve the problem. Real 3M VHB double-sided tape is the only way to go for projects like this. It's too bad some LED strip suppliers don't just do it right the first time, or at least offer pre-installed VHB as an option. It would likely prevent future customer product quality complaints like this. The light output is beautifully uniform and bright.

Nice bright, color accurate, strip with consistent light output, not segmented like some cheaper strips. Adhesive is STRONG. I had to remove a strip I had mounted in my 3D printer enclosure and thought I would tear the strip in half before it came unstuck. But the strip came free with zero damage or issues, continues to work flawlessly, and re-adhered instantly. The led strip is easy to cut, solder, and power. Dimming is even throughout all output levels, and easy to control through either a dedicated controller or simply varying the input current/voltage, as I did. The length is a good amount for the money.

The lights have nice glow i used then for under the side steps on my SUV it is tricky to solder you must clean the contacts very well i scrapped the copper contacts with a razor blade. Also secure them with clear silicone they do come with double sided tape. But because they we’re going outside the vehicle I wanted to use silicone for better contact.

Color quality is great and does seem to be high CRI. The light is very diffuse and I was able to skip a diffuser entirely, excellent for recessed lighting scenarios with a very shallow recess. I have been running this full bore with frequent on/off for quite a while and it seems to be working great.