Yaheetech Kitchen Pantry Storage Cabinet with 4 Doors and 2 Adjustable Shelves, 72.5" Freestanding Tall Cupboard Cabinet with Drawer for Dining/Living Room, White

When I have time, maybe I will write a full review. I've done many of these projects, I was a contractor for decades. First things first: Familiarize yourself with the parts and instructions.... use a highlighter on important stuff, and a pen or pencil to check off each section you complete. It'll keep you on track.... On this cabinet I spent an entire day putting it together and roughly the first 90" reviewing, cleaning and grouping the parts and hardware for upper and lower cabinets so you don't confuse them later....(literally calmly, and slowly roughly 8 to 9 hours). I think I paused for coffee or tea two or three times. I don’t even think I ate anything so maybe subtract an hour and yeah I know what I’m doing. You might want to organize all the parts go through the entire list read the steps carefully so you know what you’re looking at... then separate pieces by group. It’s a good idea to get some Windex out and give everything a good wipe down...... this things fairly clean but you'll get finger marks off. You'll see if there's any glue in the wrong places or any damage to parts. I’m one of those people that has patience and takes his time.... you'll need it seriously don't try to rush this thing. I probably spent the first hour taking everything carefully out of the box. I read all the directions first and I marked them with a pen and a highlighter on the instructions so I would pay attention to the things that were tricky. As she progressed through the steps, put a checkmark next to them to show that you're done with them and move on carefully. When you’re doing something like this, you cannot be too familiar with it..... Your expectations will be challenged, but your patience will be rewarded. Here's that word patience again. It is a good thing to go through the paperwork. Read it, mark it up , check that all the parts are in order. I even split the parts in the room. I worked on it with upper and lower cabinet parts a few feet away from each other. Lower cabinet to the left, upper part of the right. ....so I wouldn’t confuse them. You build the lower part first, then you build the upper part I made sure the lower part was square when I finally got it all together before I started to attach the top cabinet. If the bottom is not square.... then you’re in trouble. It's good to have a decent level at least a 2 foot one and if you have a right angle, you can really check to make sure cabinet is square. Right angles are pretty cheap. Sometimes you can find them at the dollar store and they are good enough. I use a couple of cheap ones to square the necks on my guitars and they work. If you put the top part up there on a bottom cabinet 'leaner' ( left or right) you’re in bigger trouble. I bought two other pieces from this company they make pretty good stuff if you assemble this thing carefully the entire time and you glue where necessary and wipe excess glue with windex (use a strong glue it will be more stable in the end) it'll work out..... and if you use a glue, it's a good idea to let the whole thing sit overnight before you stuff it give your glue time to work with you not against you. It actually came together very nicely. The handle holes are drilled off a little bit, but I’m not even going to fix them. I don’t let that bother me much anymore.. they could be drilled a little better with a drill press but when I go that far, I'm starting to question my sanity. The cabinet is nice and square. I had no problems and no missing parts. No broken pieces, nothing chipped. I consider myself lucky in that vein, I did everything by hand I do not use power tools on this. It might be tempting BUT: if they slip they’re going to scratch but even more than that you cannot feel when to stop tightening ....if you do it with a power drill even if you back off the torque; It’s very easy to overturn the cam and begin to split the "manufactured wood" product. This is mostly an engineeref MDF type of material and/or soft pine probably underneath. This stuff stays strong if you don't split it. Clamp and glue it if you do and quit for the day.... it'll need at least 24 hours to cure your adhesive....then you can proceed. SPEED KILLS PATIENCE PAYS‼️ Wishing you all the best of luck I've seen quite a number of thumbs up on this one so I hope it helped you all. Really you gotta be patient you gotta use your head and make sure you have a handful of good tools. Nothing comes together any good with junkie tools. Update: August 2025, a couple years later I got a little bit of spread with the upper doors at the bottom .....a couple millimeters wider than the top. I figured that might happen just a little bit of cabinet bowing from temperature and humidity changes. The Cure: no not the one with Robert Smith, but this one, I put a shim under the lower hinges , underneath the hinge plates and screwed them back in place ....pretty much closed the gap. The cat likes this thing as well and I haven't scratched it up. It still looks nice to finish is nice if you get anything on it just clean it quickly. Don't let whatever it is Sit there too long. It can still find its way into the cured emulsion in the paint. Quite a marathon I did here holy crow‼️

Beautiful pantry that helped me create a ton of space in my small kitchen! The directions are clear, but you need to take your time and pay close attention to the way the drawings are oriented because it is easy to mess something up if you don't. It is very similar to putting together Ikea furniture. Once finished, it is very sturdy - I don't think I even need to attach it to the wall, though it does come with an anti-tip kit. The magnets on the doors are strong and they align perfectly, the drawer opens and closes easily. You can tell the company cares about the stability and longevity of the product.

The assembly was time-consuming and the instructions were AWFUL. Were it not for my experience with these sort of "multiple steps in 1" instructions (that seek to save paper and printing costs above all else) and help from two other individuals, assembly would have taken multiple days instead of the 7 hours I managed it in. The end-result is decent. It is large and has plenty of storage space. More importantly, the shelves are adjustable. The material is a hard, coated particle board. The completed cabinet is sturdy and does not wobble. The doors are a little flimsy and the magnetic bits to hold the doors closed are trash though.

Product was well packaged; instructions were clear and easy to follow. All parts were marked well. The cabinet looks good and is sturdy. Be careful if using a power drill or driver to assemble, it is easy to strip a hole if not careful. I used a manual screwdriver and stripped a few holes. Other than that concern, everything lined up, was well made, and the cabinet looks and works great.

Pretty solid piece of furniture! Good storage for a pantry that still fit in my limited floor space. It's fairly solid and doesn't seem top heavy, but of course still use wall anchors for safety. I'm just glad it's not putting much (if any) strain on the safety anchors. It took a few hours to assemble, and you should have an extra person help (mainly for lifting the top half onto the bottom half and screwing that in, so if you want to get the major pieces assemble and then call in a friend, that would work too). The finish can chip easily, but what do you expect for a veener? I plan to wite-out over the small chips and move on.

These cabinets were a game changer for my kitchen! There was no pantry when I moved in and I had subpar cabinets we set up and used prior to purchasing these. These are very sturdy and durable! Each cabinet has one adjustable shelf so making space for everything helped so much! It even fit my large roasting pans and my 6 qt slow cooker inside! My kitchen looks so clean and organized now that I have these. Putting it together wasn’t too hard with two people. First one took about two hours then the other two went by so much quicker. All the parts were there and there was extra hardware provided. Very very happy!

Easy to put together and by myself too. Looks great and has a lot of room

The cabinet is very flimsy and cheaply made! After we got 90% of it together we noticed several spots where the wood was separating as well as several gouges in the wood. On top of that, the shelves are cut too big and won’t fit! The doors don’t shut correctly either, it looks lopsided when shut. I would stay away, this is 100% junk!! They say you can return it but I’m not sure how they want you to get it back when it came in a million pieces and 90% is already together. I can’t just drop it off at a ups store like a normal Amazon return. This company needs to refund my money and come get this pile of junk or I’ll have the garbage take it on trash day!!