WagnerHeat Gun Furno 500, max. 600°C, 2000 W, Airflow Capacity 800 l/min, Ergonomic Handle, Includes Centring and Cleaning Nozzle, LED Display

Arrived today, sooner than expected. First off, there are some marks on the handle by the plug, as per photos. it looks like someone has been attempting to remove the removable connecter without following the instructions, is this a new gun? well there's no other marks or dirt on it so i can't explain it.I tested this on the bench for about an hour and i am very impressed. monitoring the temperature just inside the nozzle showed that at lower settings it runs a little cooler than the chosen setting, maybe by 10 degrees C or so. when you get up towards 125-150 C it is much more accurate. That won't be a problem unless you want pinpoint accuracy for some reason. Overall i was very impressed . The only thing i noticed and its not a criticism, is that at times the fan speed hunted up and down slightly. I doubt this is a fault, I suspect it is the ECU adjusting both the fan speed and the temperature very quickly to maintain the correct setting, A big plus is that the cooling down cycle is good for blowing cool air to set any plastics in shape if you have been bending pipes etc. The case is sturdy and you don't need to take a pic to be able to put it all back in again. the accessory's are great and will be fine for most jobs. It's not cheap, but i recon it's worth every penny if its reliable. If registered within 4 weeks you get a 3 year warranty.

When my wife suggested getting a stripper, I was more than keen. My enthusiasm waned somewhat when I discovered she wanted some gunky gel for the garage door. Having trawled through all the paint strippers available, I thought what about a nice new toy? And this is a pearler. Easy to use, and with lots of good accessories, my garage door paint came off like soft polythene in nice big strips. There were a few stubborn spots but they were no match for this Wagner heat gun.This will keep me interest in DIY for a while - if in doubt burn it!

I’m not convinced this thing ever worked properly, the thermal cut-out always seemed over-active to me, meaning I could never easily stop and resume use. Even when using for five minutes or less, I’d have to unplug it and wait at least another five minutes before it would start up again.Despite never using it at over 150 degrees and owning for only a short time, it will not turn on for more than about 30 seconds before it cuts out again.I’m sure if it was functioning properly it would be great, but my experience has been frustrating and disappointing. Cannot recommend.

Bought this to replace my old Bosch heat gun, but find this Wagner heat gun is very fiddly to use, the old one just had 2 heat settings this has a heat range so you have to constantly adjust it to get the right heat, the biggest issue is that you can’t turn the thing off…… it goes into a cooling off mode for 2mins then switches off, just give me an on/off switch 👎🏻

Great priced heat gun with plenty of adjustments to fan speed and heat output .Love the fact the gun can be rested on the case in between using it as shown in the photo