140Pcs M6 Crib Screws Hardware Replacement Kit Black Hex Socket Cap Bolts Crib Bolts and Barrel Nuts Cross Dowel Assortment Kit M6x20/30/40/50/60/70/80mm for Furniture

We had a bolt shear off on one of our older version IKEA Poang chairs (circa 2010-ish). Apparently, from scouring the internet, they've since redesigned the chair and no longer have these bolts as replacement parts. Further searching came up with this as the size of the bolt needed! The bolt in question was the top bolt in the picture, it attaches the seat bottom to the frame. As you can see, it's not an exact match -- because it's a slightly smaller diameter head -- but it works perfectly!Best part is, we don't need to replace our chair, sending it to a landfill -- and have spares in case the other bolts suffer the same fate.

We removed the mirror on my wife's makeup desk when we moved recently. When we tried to put it back together, the hex socket cap bolts and barrel nuts were missing. These Mardatt M6 x 35mm bolts and nuts were the perfect replacement and they are very high quality. The mirror mounted solid and is held firmly in place. I would recommend these for any hex socket cap bolt and barrel nut replacement, and they come in a multitude of sizes.

Described as zinc-plated protective coating make these screws able to resist corrosion and rust. This is WRONG, as one summer of use outdoors (in which we had hardly any rain in New Jersey, and everyone one of them began rusting. Will throw away, and was a waste of my money.

I lost the original screw bolt set for the bed frame, bought this one set as replacement! It worked out well for my bed. And the full size set just super helpful saved time for me during the installation!Would recommend to anybody whose looking to assemble their bed frame with missing fixtures!

The bolt on the right has a tapered end. These bolts are shown on the left - flat. A flat bolt has to line up exactly with the nit - a tight tolerance. NOT forgiving. A tapered end will find its own way into the barrel nut, and straighten the barrel nut out. Easy to install. These bolts have rough cut (cheap) threads that dont fit well into the nuts even when youarent trying to get them lined up blindly. Do not buy. Get a tapered end bolt.