SUPCASE Unicorn Beetle Pro Full-Body Rugged Holster Case for Google Pixel 6 Pro (2021), Metallic Red

The media could not be loaded.  This is a great case and by far one of the best ones I've bought for any phone. The screen protector is an added bonus, which fits perfectly around the screen leaving no gaps. Everything has a tight fit and I'm pretty sure there isn't a half inch of this phone that isn't protected. Fingerprint sensor works like a charm. Phone does not fall out of the carrier. Very durable and easy to install. Though they could've gone an extra mile with the stand. Doesn't seem very sturdy.

I have been using this case since I purchased my Google Pixel 6 Pro in January 2022. I have now ordered the same second case for myself - that says everything!It made my smartphone indestructible. I've dropped my smartphone at least fifty times - it's intact.It has a stand on the back - you can place it on a flat surface and read your smartphone.The protective cover on the Type-C connector does not fall off.It has an extremely secure fastening system on the waist belt.An ideal choice for my smartphone, I recommend it! (I have black one)

I have bought these cases several times for different phones and will be buying another for my Google Pixel 6 pro. I really do like it, and it with stands my relatively savage abuse of the phone.Pros:Very durable. Has withstood many falls from 3-6 feet on a regular basis (I have butter fingers). The photo lens strip is well protected and I have never scratched a lens for the camera. I can also clean them well. The case is easy enough to remove, but you want to avoid doing this as much as possible because it starts to break down the protection abilities.Cons:At some point the case started letting in dust when it was in my pocket while working in the lawn. This is black dirt that is in the Florida sand. Pretty gritty and nasty. I was actually surprised to find so many big particles in the case itself. This lends itself to the biggest issue I have with the case. Once dust gets under the screen protector it makes the screen impossible to use (mainly the fingerprint sensor. Which is incredibly important for this phone). So you have to take it apart and clean it. When you wipe the backside of the protector down it gets lint on the fingerprint scanner helper and it renders it useless. This doesn't keep me from using the case though. The letter g and h are now not working well while typing and that is why I am having to get a new case after 8 months. Otherwise I could continue using it just fine.That all said I am buying this exact model again.

Edit, these guys won me all the way over with their support.I've broken my case twice now and and they replaced it both times.The newer version also does a better job with finger prints.I drop my phone a lot. I know that about me and so I wanted a case that would keep it safe. This case is not very bulky and my phone is still working great and scratch free. However.... the finger print reader only works about 1 out of 10 times. After the first month I completely stopped trying and just typed in my code. I would give the fingerprint reader capability a 0 star if I could. Recently I got really frustrated and ended up cutting a hole in the plastic screen protector so that I could actually use the fingerprint reader. Also the stand is broken and it just opens every time its picked up. If they fix the fingerprint reader thing I would probably give this a 4.

I tear through cases at work, this bad boy got me to crack a smile the other day. Rarely am I satisfied.Noice.P.S. my finger print scanner stopped working some time ago. I cannot comment on the finger print issues. I can say the design is noticeable, but I mean ... Really?If you are a pragmatic person ... This'll do.

The case itself is pretty great. Very sturdy, just grippy enough, and the kickstand is unbelievably strong. The buttons all work well, they don't protrude very much so not the easiest to find in the dark but also means less accidental pushes on the volume rocker. The cutouts and charging port flap are all perfectly aligned, I can't say a single bad thing about the case itself, but also can't speak to it's protection yet as I haven't dropped it.The issue is the screen protector, why did they even bother putting it on? Clarity is not great, feels about like looking at your phone through a sepia filter, the small dots that I'm guessing are for touch sensitivity do their job well, but if you have decent vision you can clearly see them. All of that is forgivable, what isn't is the fingerprint scanner work around.Long story short the fingerprint scanner does not work in this case. They can claim it does because of a small piece of double sided tape that goes between the scanner and the screen protector. This is a terrible implementation. You have one small circle that is stuck to your screen and looks horrible. It drove me crazy to the point that I peeled it off. I'll live without a fingerprint scanner until a better screen protector arrives and hopefully I'm able to pop this one out of the case so I can still use it.

This is the best phone case I have owned for my Pixel 6pro. The holster is sturdy, comfortable, easy to use and my phone is secure. The kick stand is perfect for portate or landscape viewing.

This is the 3rd time I've bought a Supcase UB Pro for my new phones. They are the best rugged style case I've found, better than Otterbox and often for a fraction of the price.It's a 2 piece case, with a plastic frame that fits over the front of the phone, and a harder rubber surround that fits onto the back and locks into grooves in the plastic frame, similar to the Otterbox Defender series.I work in construction, and this case has saved my phone from several nasty drops from 8ft ladders, and getting buried in concrete without a scratch, just needed a good hose off.I've now started looking at which phones Supcase makes a UB Pro for before I buy, the most recent being a Pixel 6 Pro.There are a couple things to mention however ;The UB Pro comes with a holder that the case clips into, like the Otterbox Defender. On the Pixel 6 Pro, you can place the phone with the screen in, or out (not the case with my old V30) however, the clip on the back does not lock, like the Otterbox, so it can't be used as a stand. It also blocks the volume buttons while it's clipped in, but not the power button.That being said, this case DOES have a built-in stand, if that's something you needed.But that means reduced space on the back of the case to attach steel discs for magnetic mounts, or Popsockets.You still can use those attachments, but they won't sit 100% flat. I haven't had any issues with mine so far, but something to keep in mind when you're buying accessories.With all that in mind, I'd still recommend this case to everyone.

quality of case is A1, I have full Confidence I won't be shelling out for another new phone screen

I had one of these for my previous phone and I must say, these cases are bullet proof.I've dropped my phone onto hard tiled flooring and everyone thought the phone would be broken but the phone was 100% safe.The case is a fair weight when you're holding it to scroll your phone but if you want full protection then it needs to be robust, this means a bit of extra weight.The case itself is easy to fit and comes in two parts.The outer case, and the front screen protector.You simply follow the easy instructions slot the two together and it takes less than a couple of minutes.The Google pixel phones have a thumb print unlock on the main screen, so this case caters for that with a thumb print zone.You need to be aware of this when cleaning as it's sticky so will gather fibres from your cleaning cloth when you give it the inevitable spring clean.I find that using a bit of sellotape you can clean the thumb print zone without causing issues.The back of the case has a kick stand for watching videos etcThis is ok but I find it's the only weak point of the case.After a while mine has lost the will to live and collapses, this and the back camera opening is where most of the dust and dirt will get in.Not huge amounts but worth a clean every couple of months.A small price to pay for great impact protection.Well worth the money, my old phone was a Samsung so they are available for most makes and models.

A me proprio la pellicola di plastica.non ha mai convinto e non mi è mai piaciuta. Si sporca facilmente, non si pulisce bene. Appena la cover arriva, la elimino e pulisco la colla sul suo telaietto. Sostituisco poi il tutto con un vetro di protezione o con una pellicola da installare direttamente sul telefono.Il kick stand in plastica a scomparsa è fragile, non durevole, non capisco come mai non v'è ha sostituito con uno in metallo.Lo scudo / attacco da cintura funziona in entrambi i sensi, sia con lo schermo a vista, sia con lo schermo nascosto. Peccato che la clip di sgancio sia proprio in corrispondenza dei tasti laterali di volume e blocco, re dendoli impossibili da usare.Per il resto è la miglior cover testata fino a ora.Usata anche per galaxy note 4, galaxy note 9 e pixel 6 pro.

Good quality. Looks great. Covers front and back of phone.