PolyLite Black 3D Printer PETG Filament 1.75mm 1kg, Legacy PETG Formula, +- 0.03mm Dimensional Accuracy, Reliable Everyday Filament, Strong Layer Bonding, Compatible with Most 3D Printers

Came in a mylar vac sealed package. Very robust. Didn't dry it at all, just threw it into the printer and ran a benchy to start off with and see how the stock settings in the profile from the Polymaker website worked. Flawless. Literally zero defects right out of the package. It prints fairly hot at 255C, with a bed temp of 70C, and very limited cooling. The volumetric speed is about half the newer version (non legacy), and the line speed also quite slow relative to the polymaker HF PETG. It prints beautifully with a nice glossy sheen. Not a fan of the lower speed it needs, but the results were quite good.

So far I have only used the Black PETG (apparently the old formula) I have a few colors to try. I don't have a single complaint yet. Out of the bag and straight to printing, it's been loaded on my printer for prototyping some speaker podz for over a week now and still doing good. Pros compared to other brands I've tried: - Hardly any stringing at all - Smooth prints with a nice sheen - Layer adhesion is good - Spool is neatly and tightly wound - Yet to have a tangle - Does not appear to be AS brittle The only con I can find is it does not seem to handle bridging as well as the previous brand I was using.

Really solid PETG. Prints clean and consistent, and the spool was wound nicely. Would buy again.

Date of review: 9-15-24 THESE ARE TWO SEPARATE REVIEWS. I am writing another review of Polymaker PETG. What is going on at Polymaker?? Now it's the RED PETG! And this was the replacement roll. *see photos* What you see is the red and what happened, and the roll alongside the build plate that was used. The printer photo is my Q1 Pro with a competitor's roll. Same gcode. Different results. MUCH BETTER RESULTS. When I got the Polymaker red, It stayed sealed until I dried it last night., Overnight at 50°C. I bought roll after roll of Polymaker PLA for months with excellent results. And now I have tried black, red & white petg and it's garbage. I can't open every single roll the day I get it just to insure it's quality stuff. Now it's past the return period and I'm stuck with this garbage and 14 parts behind my production schedule. 😡 I just want quality stuff. Polymaker is supposed to be quality. I hope someone from Polymaker sees this but I doubt it. Date of review: 6-12-24. For some reason Amazon thinks this is white filament but it's black! I've been using Polymaker brand filament for quite awhile now. AND for a long time I've gotten great results but it seems like since Oct of 2023 the quality has went downhill. Had an issue with tangling on some red PETG I tried to use, (WHICH TO THEIR CREDIT) was replaced but I just an issue with some black filament I bought late last year that cost me over 5 hours on a job. Between prints I store all my Polymaker filament in the bag it comes in with some desiccant packs. It stays in the bag and in the box until I'm ready to dry it before printing. The photos you see are from: 1. A roll I purchased late last year and then stored as above. 2. After pulling the roll, it got dried at 60degC overnight. That's always worked! Somewhere in that roll there were really BAD SPOTS. Bad adhesion and Lord knows what else. This lack of quality cost me more than $47 in time and material! I know it's well past the window to return for return or refund but if anyone at Polymaker reads this PLEASE get in touch with me. You guys do a great job of fixing issues with your filament and I'd really like this fixed. Thanks. Steve C.

The new formula is great. It’s basically high speed PETG but I love the color, quality and durability I get from it. Just make sure you dry it before printing as PETG absorbs moisture was faster than PLA.

The color is nice, it comes in the same kind of bag that Corn Pops come in, and it was dry from the factory. There's even a preset in Orca for this exact filament! The only reason to take the star off is: 1. The spool says to print at 230 to 240. The 4 3DBenchys I tried to print in that range disagree with that. My K1 SE wants to print this at 255 with a 70C bed. 2. The spool ALSO says that the print speed should be between 80 and 100mm/s. That's not a lie. If you go too fast, everything either strings, warps, or tears into the part with reckless abandon. 3. So far, seams look pretty rough, but that's going to require tinkering with Orca settings. Speaking of Orca, the default settings for Polylite PETG have it set to print at 255C on an 70C bed, contradicting what's printed on the spool. Overall, the print quality is good, if you can get past it taking 3x as long as other PETG's. It is dimensionally accurate, at least.

This was the perfect shade of yellow for some noodle prints. Had some tangle issues on the first print though, but the other 3 prints turned out amazing.

After seeing a lot of advertising and people being paid to promote this brand, I was excited to try it. Compared to Ellegoo or bamboo lab the stuff is way harder to print with. For whatever reason sometimes it doesn’t wanna stick sometimes it doesn’t wanna hear on the after the first layer, but there was five print failures for every one successful project. This trail filament didn’t make me want to try more of this variety when it did work printed really good, but not better I’d say than other brands of filament I tried changing print settings and tuning it and while I did get some good prints, most the time for whatever reason or various reasons they would fail. I had a lot of spaghetti monsters a lot of adhesion issues that common remedies didn’t fix or weren’t needed on other filament varieties.

Filament quality is exceptional. Best white PETG quality I've ever tried yet.

Pro: -tolle Farbe Contra: -Haftungsprobleme ohne Kleber -Zog trotz trocknen Fäden -teuer -musste recht langsam damit fahren Hatte es mir gekauft, weil ich das PolyTerra Filament gut find. Allerdings bin ich damit nicht gut gefahren. Kauf mir in Zukunft anderes PETG

Schönes Filament. Hatte beim Drucken keinerlei Probleme und die Farbe gefällt mir sehr gut

Ottimo, consiglio di tenerlo ad asciugare

Résultat à l’impression de piètre qualité par rapport à un autre produit similaire d’une autre marque tout en ayant utilisé les réglages de température préconisées par le fabricant.L’impression sort mate et non brillante entre autre . Assez déçu par cette marque d’autant plus qu’elle semble être en général assez bien notée.