JDiction Fast Cure Epoxy Resin, 20OZ 4 Hours Demold Epoxy Resin Kit - Crystal Clear, Bubble-Free, Not-Yellowing, Self-Leveling for Art Resina, Jewelry, Craft, Fast Casting & Easy Mix Epoxy Resina

This is my favorite resin for dice. The quick cure time also translates into a quick work time, which means i don't have to wait as long for the honey stage. The resin cures extremely hard and clear and is easy to work with.

This is a great resin. It’s the first time I tried it. I love being able to demold projects same day. Just be careful and understand they aren’t fully cured at this point but can be handled. It’s got a high viscosity so getting the bubbles out uses up a lot of your working time. The little stirring machine had trouble mixing the resin because it’s so thick. Warming it to thin it out seems to shorten the working time so it’s best to mix by hand and spend your working time on degassing.

Ok so let's start off with the fact that these pictures don't do the pieces justice at all! I was so beyond amazed at the clear shine thru them, no bubbles at all (including microbubbles!!!) And that gloss is just amazing!!! So, firstly I read all the directions, with any new product I want to make sure I'm doing everything right! I mixed according to specifications (although I do tend to mix quickly and heavy handedly!) and virtually no bubbles after mixing even! The few microbubbles I did see rose to the top so quickly! One thing I was worried about was the work time, you'd think with a resin you can demold in 4hrs, you'd have about 10 minutes but totally not the case at all! My creativity takes me all over the place and my workspace isn't the most organized so between mixing and pouring, it took me about 20 minutes to get everything mixed in the resin that I wanted and absolutely no sign that the resin had heated up or was about to flash cure so I'm assuming I had more than the specified 30 minute work time when using this! After pouring I set a timer on my phone and put on a good show I could really get into (because I was so excited to see how the resin did, I knew if I wasn't seriously distracted I would be checking every 5 minutes lol) and the minute my timer went off I went to check my pieces!! Not only did they demold so easily, but there's no sign of them curing at too high of a temperature (you know when something flash cures, you get those waves in your piece. NOTHING IN THESE!!) I of course let them finish curing for the next 4hrs but I'm so impressed with this resin!! Definitely be recommending to friends and fellow crafters!! Absolutely amazing!!! 😍😍😍 (Some pics were with flash, some without. I wanted to get a variety of types of pours, small keychain pieces and slightly larger pours but didn't want to wait to do multiple layers for a deep pour. One of my molds was painted with mica powder before pouring which makes it slightly less shiny but that's the mica, as the other piece is so incredibly shiny!)

This is a good resin for those whom may be in a rush to demold their creation. However because it is thicker resin it is more likely to trap bubbles unless you have a degasser or pressure pot. Also I would recommend extra mixing time and scraping the sides and bottom thoroughly.

I was worried seeing the reviews about not working and a lot of bubbles, but after using it I will never use another brand! I made a huge skull and a big pyramid in one day! I had no problems! It worked with alcohol ink and mica seamlessly! I did put it in hot water before mixing, when I began mixing there were some bubbles, but they disappeared after 4 minutes of mixing! I didn't spray them with alcohol, I only used a heat gun and long neck lighter and there were zero bubbles! The smell wasn't bad and I would highly recommend it, and will buy it again!

I needed to restock these 2" golem statues, which are about .75" thick, before an event, and turned to the quick cure resin, hoping to make multiple batches. I used a resin heater to be sure my resin was properly warmed, degassed it and added just enough black resin paste for a solid black, poured it into molds dusted with mica powder. I've made hundreds of these statuettes; this is old hat for me. I put the molds on my warming/leveling table and put the cover on. I waited a little longer than 4 hours, and started demolding... and immediately squished the hand of one of the statuettes. Definitely not ready to demold, because it was still very soft and flexible! That piece was unsellable as A-stock and will have to be sold at a discount. I tried again at 5 hours, and it was still soft enough that the hands got damaged and the golem became B-stock. At 6 hours, the pieces could be demolded without damage. Once I could demold the pieces properly, they looked great and were easy to trim and finish. So... is this a "4 hour" resin? Not if what I got is indicative of every batch. Maybe I got a bad batch, because this is far from my first resin rodeo. Is it "quick cure resin?" Eh. I can pretty reliably demold the Let's Resin epoxy resin in 6 hours if I have to, and that's 25% cheaper than this. It does mix well, and it's got a pretty decent working time. Like I said: maybe I got a bad batch. I am not rushing to restock this, though.

Love it! Requires a fast handling due to its viscosity, but worth it: dries fast, and looks very clear. Price is the best too over other brands. Watching a review video helped me to purchase it and I am so happy and satisfied!

The JDiction Fast Curing Epoxy Resin is designed for quick projects, with a 4-hour demold time and a formula that minimizes bubbles. This resin is crystal clear, self-leveling, and easy to mix, making it suitable for various applications like art, crafts, and jewelry. The 20-ounce kit is ideal for small timbers and other detailed projects. Users appreciate its fast curing time and minimal odor compared to other epoxy resins, making it a convenient option for both beginners and experienced crafters.

This is good stuff to work with and I’m pleased with it thank you

The resin itself was easy to use and set well. The only downside I can give (and it doesn’t just go for this sellers product but all the ones I’ve ordered from Amazon) the mix is 1:1. I pay great attention when measuring out my mixes and weigh the two parts to the exact gram prior to mixing. So why am I always left with nearly a third of a bottle of the resin A when the resin B (hardener) is then totally empty. Even prior to opening it’s obvious when the bottles are put next to each other that the amounts differ.

Excellent product, easy to use with good results

I found this resin easy to mix but as you do this I found more bubbles formed in comparison to the craft resin which is the other resin I have been using. I also found it thinner than my other type I use. This can be useful for some crafters but not for me. I don't think I will be using this again. It creates a lot of tiny bubbles when you've mixed the resin and hardener together. You would probably have to wait quite some time if you didn't want to add any pigments dyes or sequins to the mixture, and then have a shorter tome in which to use the mixture.

This resin is way to thick, it's really hard to work with, due to the ultra thick consistency of the resin and hardener. I have been using resin for some time now and thought I would try this brand. What a mistake. Waste of money. With resin the old saying of you get what you pay for is very true. I will not be buying this again. It does cure quickly, the only claim the manufacturers make that is true. Avoid this stuff at all costs.