IMPACT IMPLEMENTS® ATV/UTV Tractor 1-Point Lift for Agricultural Implements Like Disc Plows, Cultivators, Box Blades and More.

This is a replacement for the original. Works better than old one definitely recommended

First of all, this thing is HEAVY! But it's super easy to put together like a big erector set. My problems began when I went to actually install it onto the hitch adapter. The hitch on my Grizzly is TOO LOW for this unit. No matter what I did to raise the hitch to get clearance and crank the lift up as far as it would go.......I was still not able to get the cultivator off the ground. So I detached it, added a 3 way hitch to gain lift, TURNED THE WHOLE LIFT AROUND, and installed it that way. That gave me the lift I needed plus the clearance needed to still be able to turn the lift/lower handle without hitting the back cargo rack. Like others have noted, this is a very sloppy linkage to begin with, so with the added hitch it just gets sloppier. But as you can see from the photos it still does the job I needed it for - busting up grassy over grown raised beds. The ground is uneven, I suspect once I get it flat things will move much smoother. Even though it didn't go on easily and I had a bit of a panic when it wasn't setting right, I don't regret this purchase and it sure beats doing all this by hand! If you're looking to do harder and more in depth work, I strongly suggest a 3 point solid hitch for the attachments.

Tighten the bolts properly, if you go too tight it won't move, too loose and it may fall apart, this isn't rocket surgery, but if you put this together and nothing moves, you've messed up. Also, find grease that works for your temperatures, I'm in Northern MN so I needed something that works to -40 or so, and I have that in a grease that works from -75 to over 500 degrees. Grease the threaded rod, a lot, now wind it up and down completely a couple times, now grease it a lot again... if you've used good grease this thing should be smooth and simple to operate, it's amazing what grease can do. Throw it in your rig, see how it sits, adjust height and go, but with the understanding that this isn't a $2k attachment, it's $200, so your truck in 4lo with the 454 big block and 54" mud boggers will tear it apart if you don't mind your throttle. Side load isn't going to be great for it, look at it, should be obvious. Just keep that stuff in mind and maybe slow down when needed, be a little more careful in those areas... Also, add weight racks or bins or whatever to the implements and add weight to them to get them to work better, really torquing down on this arm and using the implement leveraged against vehicle will wear hard on this, you can do it, but adding weight to the implements would be a far better plan. Let that weight get them to dig down, scrape the driveway easier and so on, instead of torquing this arm till it screams. So, it works... After greasing and running her up and down a few times, she's smooth, easy to operate, quick. I actually use it with my truck, using the blade to pull snow at the moment. Updated 12/15/23: Ordered another one point lift as the bolt holes broke on one part of the first, that's fine enough, I'll live. What isn't fine is that the new one came missing major pieces, I was able to pirate them from the broken one, but this thing was packaged abysmally, I don't even understand how a person would do this and send it out and think it's remotely ok. So, down to 3/5 stars. I now see they have an updated Heavy Duty version of this lift, would have gone that route but a moot point now, imagine I'll go that route in the future though.

Really well built. Not a piece of junk. Built to last.

First, the quality control on this sucks. I had to use a file to scrape away metal shavings left in the bolt hole for the handle. Second, The raising and lowering function of the implement is non existant. You can only move it less than an inch, bevause the bolt hole that hols it to the rest of the frame does not allow the mivement needed to raise and lower the implement properly (see video). Third, The instruction has nothing but pictures and very little assembly instruction and you are suppose to follow the pictures to put all the parts together.

Bought this as well as the impact box blade to use with my Polaris Ranger UTV. Upon assembly and mounting to my UTV the product seemed solid and dependable. After raising and lowering the blade a handful of times over my first 15 minutes of use the handle was getting very hard to turn and metal shavings appearing as if the long threaded rod had become cross threaded some how and now I can no longer raise or lower the blade at all. Wondering if I should have sprung for the hydraulic version and sort of kicking myself now.

Heavy duty unit, simple to assemble. I just needed to add extra washers in between te hinged arm lift. The spacing helped a lot.

This heavy-duty hitch works great even on my Deere Lawn Tractor. Now I can add implements of different kinds without a large full-sized tractor to do it with.

Juste got IT assembled can't Wait to use it

You will need to purchase a couple connectors to use these with the atv. Was difficult to figure out what I needed. I just brought both pieces to the farm equipment shop and was set up with my needs pretty quickly

Never received all parts

ok

I think it will be a great tool.,welds were not fit or finished just right.Other than that really solid equipment.Thanks. Adjustment 3 sided plate would not line up due to welds and radius of tube didn't work out.Larger tube say 2x3 and possibly slight up down slot and also using sleeve and grade 8 bolt. Thanks again John Barrett