XS Scuba HP Splitter

Gives you the ability to have an extra HP port to your 1sr stage regulator. Great if you want to add a Tank pod/ transmitter and only have 1HP port

I used this XS Scuba High Pressure port Adaptor to add a new Tank Pod transmitter to my existing set up. My 1st stage regulator has a single HP port; I want to continue using my existing console (Suunto SPG, Gekko Computer, Compass) as an analog back-up, with the new tank pod transmitting tank pressure to a Suunto Eon Steel Dive computer. I connected the Suunto Quick Disconnect to one port (to console) , and the Suunto Short HP hose to the other (to tank pod). It's a slick configuration for my setup, and provides multiple backups.

My old first stage only had one high pressure port, so I used this to create a second. I have my standard gauges connected to one of the ports and my Air Integration transmitter for my Shearwater Teric dive computer in the second port. I have used the set up on several dives and it works great. Don't forget to put some silicone on the o rings when you are putting it all back together.

Need to add a backup spg to my air integrated computer. This piece feel well made and the swivel design allow for the hose to move to the perfect place. I installed the tank pod to the fix port and the spg hose to the port on the swivel. For the tank pod follow your manufacturer installation instructions like it was directly installed on the stage 1 HP

O-ring blew out after less than a year of use. Luckily happened while on the boat and not in water. Ended up purchasing a new 1st stage with 2x HP ports.

My wrist computer was not receiving information from my tank transmitter just before a dive. I had to borrow a rig from the dive boat but did not want this to be a factor during a deep dive. I added an APEKS SPG and split the HP on the 1st stage so I can add the SPG along and still use my transmitter. Works great!!!