20Pcs Extended Version Bolt Extractor Set, Impact Bolt & Nut Remover Set, Stripped Lug Nut Remover, Extraction Socket Set for Removing Damaged, Frozen, Rusted, Rounded-Off Bolts, Nuts & Screws

Worked, pain in the arse to pull out.

Out of four bolts on my Kawasaki ZZR1200 Tokico brake caliper, two popped out nicely and two just rounded off the hex inside the head. Heat, penetrating oil and a good quality hex-socket hadn't worked, so I bought a set of these as a last line of sanity before the grinder got dusted off!The whole job took less than five minutes in the end. Tap in the screw extractor to get it to bite, then gently begin rotating counterclockwise and you can feel it digging into the screw. Now increase the pressure (24" breaker bar!) and watch it do its magic. I must admit that I was worried the bit would break before the screw came out, but in the end all was fine. Inspection of the extractor afterwards showed no damage at all - still like new.With any screw extractor there is the worry that it'll break off and make the situation worse ... in this case, the tool did the job as needed and as such I'm very happy with the design and quality of them, so much so that I bought the complementing set of bolt extractors. Overall a great addition to the workshop.

Saved me £70

The product was exactly as expected and from pictures and description provided.Although the the bolt extractor socket does what it says on the time i.e. it grabs the bolt head but as yet not been able to get sufficient purchase on the ratchet to budge the bolt. I have added penetrating oil around the bolt and will leave for a day or possible two before trying again.I wanted to get the bolt out without having to drill the bolt out but this maybe my only option.

Once and then broke with big crack, does not withstand the power of a hammer that is needed to undo the locking nuts.Not good quality at all. I am surprised that there is so many good reviews.

Remove snapped bolt from under car by taking time and not using excessive force. Worked well.

On Saturday morning whilst trying to get the brakes on my range Rover changed one of the wheel nuts snapped in half leaving the rest on the stud. I went to few garages without any luck and finally found this kit to try. I was very sceptical but decided to give it a go anyway. Kit arrived next day and I went to try it. Found the piece which would snuggly fit and hammered it in. The attached a 19mm socket and a breaker bar and with all my might snapped the nut loose. The tool dug in and did not budge (like it should). I was totally amazed and impressed by this set.Definitely recommend it to anyone with the same issue 💪

Damaged BMW locking wheel stud removed with this kit first time? Thought it would have been a waste of time but to my surprise the sized bolt came out even tho it was so tight I had to use a piece of scaffold pole to extend power bar!