LTP Ironwax Gloss Sealer 1 Litre - Gloss Stone Sealer

This stuff is super. I used it on my kitchen floor which is Chinese slate. It was so dull and drab looking but this has brought a brilliant shine to it. It really looks great. I decided to use a brush rather than a roller so the rough dips in the tiles would not be left with pools of liquid. I gave it two coats although one was fine. Dries in about an hour and the floor looks well sealed. I’ve tried loads of different sealer but they never left a good shine and in a couple of days you wouldn’t know it had been done. I did this a few weeks ago and it hasn’t lost any of its shine and looks like it will last quite a while. Only takes about 20 minutes to apply one coat. I still have half a container left but don’t think I will have to use it in the near future.

It does what it says on the tin. I applied it with a paint brush. You don't need a lot so a bottle goes a long way. You need to reapply to get the depth of finish at least 4 times however it will not give you a high gloss wet look finish but more of a satin finish.

Have used this product here and there on my slate kitchen floor. The floor gets a fairly hard life, what with the dog traipsing in and out, six cats loitering around, not to mention 2 kids back and forth. This product is about the best I've found to protect and seal the floor and giving it a decent shine. I preclean the floor beforehand and usually apply about 3 costs over the course of about 2 hours. Being quite porous, the skate quickly absorbs the sealer and is usually dry enough to walk on after this. Once properly hardened, after a few days or so, it is fully waterproof and looks fantastic. I always use this stuff and will continue to do so as long as the floor is down. Excellent stuff!!

Excellent product! Easily applied goes a very long way. Good sheen and easy to clean!!

Average

I applied 5 coats and it does give a shine, great

Using this to seal a brick fireplace. Does exactly what is says in the description and works well sealing the dust and giving the brick a clean shiny look. 1 litre doesn't go a long way, so make sure you have enough.

This is a good product. I know it's unusual but it actually does what the manufacturer claims. Once you've cleaned and dried the tiled floor just rub the stuff in - it dries quickly and you can immediately see the shine. In my experience, if you apply a second coat the sheen will remain for several months.