















⚙️ Unlock precision power with every push and pull!
The Heschen HS-1564B DC Solenoid Electromagnet is a compact, push-pull linear actuator operating at 12V and 3A, offering a 20mm stroke and up to 60N holding force. Designed with a copper coil for stable performance, it’s ideal for small projects requiring reliable, repeatable motion with easy installation. Perfect for professionals seeking efficient electromagnetic solutions without overheating risks.




| ASIN | B09T32M2S6 |
| Best Sellers Rank | #50,874 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #13 in Solenoids |
| Date First Available | January 9, 2019 |
| Is Discontinued By Manufacturer | No |
| Item Weight | 13 ounces |
| Item model number | HS-1564B DC12V |
| Manufacturer | Heschen |
| Package Dimensions | 4.61 x 1.77 x 1.69 inches |
T**Y
Very functional for small projects
This is a good solenoid for small projects.Good foot pounds of force for its size and voltage. It moves about 3/4" and retracts when activated. 12 volt power will actuate it easily without issue. The Electromagnetic retracted and spring loaded return solenoid can cycle several times a minute. Doesn't build up much heat. The body doesn't have a lot of mounting options but it can be held down with a bracket.
L**Z
Seems to work
I have not actually installed this on anything yet. But it bench tested very strong. I am sure it will work fine for my needs.
A**L
adorable tiny solenoids
This is a very small solenoid... it seems well made and I hope it is the right thing for my project. I have not energized it yet.
T**I
quality product. modified solinoid mount on my welder.
quality product.
M**D
Works great and it's beefy, but it doesn't have a 25mm stroke.
This is a powerful, fast, single action (with spring return) solenoid with a large diameter shaft. This would work well if you don't need the advertised 25 mm stroke. The solenoid I received only has about 16 mm of stroke. Distance to the drilled linkage hole is about 16mm retracted and 32 mm expanded. If those measurements fit your needs, this is an otherwise well built solenoid.
J**7
Not a 25mm stroke
Needed a 25mm/1 inch stroke solenoid. This is advertised as 25mm...but it is 18.8mm. You can remove the end nut and get to 25mm...but without that end nut, the shaft of the solenoid will fall out. So this is not a usable 25mm. Just be aware that if you need a 25mm stroke without the solenoid shaft flying out, this won't work.
G**N
Tested, works
I tested the solenoid on 12 volts, and it works well. 30 N is more force than I needed to operate a little sliding trap door, but I needed the 25mm displacement, so, there you are. Works well.
E**O
Work as expected
I ordered two of these solenoids to use in tandem on a small shaker table. They work perfectly. I haven't tested them over a long time interval, but so far they are fine. They do not overheat during quick on/off use. The mounting screws were difficult for me to use. A clamp worked fine.
D**S
non vale niente ha funzionato solo 3 volte e quando ha funzionato aveva pochissima forza atro che 60N, prodotto da evitare.
C**N
rapido y correcto
A**A
Die Magnet-Elektromagneten vom Typ HS-1564B der Firma Heschen 24V 1,5 A erfüllen alle nötigen Standards und überzeugen durch ihre hohe Qualität. Das Produkt kann uneingeschränkt empfohlen werden.
P**I
Tutto perfetto
C**N
Lo he utilizado para abrir la puerta de los perros en caso de amenaza. Funciona correctamente, aunque he tenido que afinar mucho la puerta para que fuera fácil de abrir , ya que a mi entender le falta un poco de fuerza . Por lo demás genial 🙌
Trustpilot
2 weeks ago
2 weeks ago