StarTech.com 2.5" to 3.5" SATA Hard Drive Mounting Bracket Kit - Dual SATA SSDs/HDDs Mounting Bracket for Mounting Bay (BRACKET25X2)

I read some customers were complaining that the holes were not aligned for the screws, well I guess im lucky with what I got then. It was perfect for my 2 SSD setup to be put in just one 3.5 bay. My only suggestion would be to have an improvement with the manual and which and where to put the different screw sizes. I managed to somehow install them in the right holes by checking back on my previous SSD which was the OCZ that has its own adapter for the 3.5. It would also help to have an arrow as to which way the bay should be facing as I made an error at first on putting it the other way making the holes not meeting together. Furthermore, my computer seem to be unstable when Im using the power splitter provided, I am not sure but when I put everything with the power splitter that was provided is my computer was shutting down and was unstable, so i decided to just use the vacant power cables direct from my PSU and connect it to my SSD's. Apart from those, everything is fine.Very happy with the quality.

easy to use mounting my only criticism would be no mention of or inclusion of spacers for 51/2 inch bays like mine (I had a couple of spares).

I found that the vertical posts were just a bit too tall to allow it to fit easily inside my iMac, where it was to hold a 2.5" solid state replacement drive. Luckily, it's metal, so I was able to bend the supports to make it fit. The screw holes are the right size and in the right places to take the 3.5" drive fittings, and it is now safely installed in my iMac.Note: The 2.5" drive is held centrally. The SATA connectors on the 2.5" drive are not put into the position that they would be on a 3.5" drive. But this was OK for my purpose, as inside the iMac those connectors are on cables. No doubt for other applications this would be a problem.

Ok so no reviews on this product, so took a gamble. But hey its great. I managed to connect two laptop drives to my main desktop PC and then clone one laptop drive to another super quick to get my laptop up and going after a catastrophic hard drive failure.I havent used the caddy, but the cables are excellent quality and work perfectly at full speed

I've been building PC's since 1995, this bracket will meet your needs if you have a standard set up. It has threaded mounting holes in the bottom as well as on the side for your 3.5" bay, if it doesn't fit or the holes don't line up I'd guess your requirements are non-standard. It has room to easily seat two 2.5" hard disks in between the center vertical brackets. Recommended.

Many adapters only have side mounting holes but this one has the base ones two. Great value.

Good comprehensive kit but it doesn't align a SSD properly. Instead it places in centrally. You look at any 3.5" HD and the connectors are offset to one side. So this kit is OK if you have just the one drive in your desktop PC but less suitable when you have two or more drives which are powered via a a single cable which requires all drive power connectors to be aligned.Furthermore, whilst a 2.5" SSD will fit inside the cradle, the cradle is too short to allow the attachment of those plastic quick release mountings for hard drives - which my Dell PC uses.

Fits into a standard 3.5" HDD slot, allowing you to fit a 2.5" SSD. I opted for the dual version, which allows you to fit 2 SSDs into one 3.5" slot as it was only 34p more expensive and the option to fit an extra SSD in future is pretty handy.There were no hitches fitting the drive or mounting the adapter - very straightforward to install.