4pcs Pry Bar Nail Puller Set, 12” Flat Pry Bar, 7.5” Flat Pry Bar, 12” Crow Bar with Hammer, 9” Chisel

Nice for the price.

Running away smaller tools like maybe 6 to 8 inches worked awesome for the job. None of them broke.

I save a lot of scrap wood for my workshop, and have to pry the pieces apart and remove nails. I got sick of using just my old hammer and cats paw so I got these. They make the job so much easier and faster, with a lot less cursing. With 3 different sizes and 3 ways to pull nails on each, they make the job a breeze. They’re nice and solid, feel great in the hand, and will last years. Haven’t used the chisel yet, but it’s there when I need it. And I will.

Worth it, good price, good stuff 🤙🏻

Items are great for prying and nail removal

I am impressed with this set of pry bar tools. The combo-hammer/crowbar has a magnet to hold nails (see pic). The chisel is great for getting a gap between wood pieces to make it easier to insert either the large or small pry bars. The hammer and chisel have a very comfortable hard rubber hand grip. The pry bars have rubber caps to protect the edges.Testing: I decided on a heavy-duty test for these. I have an old freight pallet in the basement that I intended for the woodstove (someday). If you have ever tried to deconstruct a freight pallet, you know how hard it is – super hard wood, twisted nails, massive stables, etc. Using the hammer and chisel, I was able to open a sufficient gap for the large pry bar. With a lot of effort, I was able to disassemble a few pieces. The pry bars withstood the prying tension very well. (I will use my power saw to cut up the rest of it now – this was a test of the strength of the chisel and pry bar metal.)I am very satisfied with this order.Note: I find it interesting that crowbar is one word and pry bar is two words…smiles.

Broke after 5 min of the first use. Might work on prying a thumb tack out 🤷

I found this little set to be incredibly useful this past week. If you are in a tight spot or need something for delicate work, this is what you need. To pull a nail or pry up a piece of molding in a tight corner, it cannot be beat. It is rigid enough to pry and pull with without worry about breaking the tool. It is also small enough for delicate work. I would use it for getting into corners, finish work on dry wall, and anything else you need. This would make a great gift for the guy who has anything. Good tools to have in the arsenal.

Recieved item and used nail puller to pull out some nails used it for 20 nails and the back end broke clean off

Great quality just what was expected

The media could not be loaded.  Strong materials and construction and fully powder coated finish. Good weight to them and perfect for fence repairs and prising apart panels and lifting nails. Worked perfectly as expected

I have a couple of flat pry bars in my work bag that i use on a regular basis for pulling up floor boards and skirting, removing tiles, pulling nails and various other tasks that require a bit of leverage, so when i was offered the chance to test this set from MANUFORE, i jumped at the chance, as for some jobs, it is handy to have a couple of bars.In this set you get 2 x flat style utility bars (a smaller 19cm and a larger 30cm one). These have a double pronged section at either end with a chisel type profile so that you can force it in behind boards etc. The V groove in the centre of each end can be used for removing nails.One end is slightly curved, whilst the opposite end is bend to 90 degrees – these curves mean you can get more leverage.Next up is a 30cm 3-in-1 tool that features a slightly curved chisel section on one end and at the opposite end is a narrow nail puller and a small hammer that includes a little magnet and groove that you can place a nail into and then tap it into place using a single hand.In the centre is a nice rubberised handle for added grip and comfort.Finally, you have a 23cm long chisel that you can hammer in and then lever. This is also fitted with a nice rubberised grip.***** In The Box *****1 x 19cm Utility Bar1 x 30cm Utility Bar1 x 3-in-1 Nail Puller/hammer1 x Chisel***** Conclusion *****Overall, i’m pretty pleased with this little nail puller/utility bar set.You get a really handy selection of bars that are useful for a whole range of different applications.Each one is made from some kind of alloy steel and has a pretty decent feel to it.I will say that the utility bars do seem nice and sturdy, although they do have a slightly cheaper feel, the chiselled ends are nowhere near as sharp and they have slightly less weight to them than the Roughneck ones that i have been using.I think the £28.99 asking price is fairly reasonable, although I would probably be inclined to go with the Roughneck equivalents that would cost roughly the same as this set does but come with a 25 year guarantee.Having said that, this is a nice little set and would be great for use around the house.

MANUFORE 4pcs Hand Tool Pry Bar/Nail Puller SetOn arrival I found these bars to be much bigger than expected, which is a good thing as a good amount of purchase can be had with these. As there doesn't appear to be much in the way of a description in the listing it's hard to say what these are actually made of. They do appear to be made from high carbon steel and appear to have a good amount of strength in them. The metal is rough cast so do not have the rifinement of a high quality tool, although these do seem strong and sturdy and certainly up to the designed task.I can see these lasting a very long time as they certainly are strong and robust. There are 4 different bars in total which comprise of a single long chisel that has a hard silicone hand grip. A small hammer is included, but I would suggest using a much larger lump hammer on the chisel as the provided hammer is only good for light work. The small claw hammer is good for knocking in or removing small nails, larger nails would need to be removed by using one of the other prise bars. The hammer also has a hard silicone handle set mid way, the opposite end of the hammer has a big prising shape which will be of great use. The other 2 tools supplied are 1 x small and 1 x large prise bar.Overall these are strong and will be a very useful tool set to have. I really do like these as I certainly have a use for these. My least favourite is the small hammer end which is a little too slender to be of much use to me.CONTENTS:1 x Chisel Bar1 x Short Pry Bar1 x Long Pry Bar1 x Pry Bar With HammerThank you for reading my review, I hope you have found it helpful.