2*15ML Upgrade T-7000 Black Adhesive Glue

Works great. It wasn't very thick, good quality though, easy to use, black in color. I used it to secure s new replacement screen in my phone.

I have an old Samsung S9 where the back separated letting coins get inside phone. I used a disposable scalpel to cut the last few strands of glue holding the back on. Used glue all around the edges and places it was before, not in the sim card area. Pushed it together it tries to open up still so being strong Gorilla glass I put a paper towel around phone and placed a 3 gal filled water bottle on top, flat on the bottom and left it to dry for 24 hours. Now back stays on, phone works fine. A bit of black glue around edges. I got a bit on front of glass because my disposable gloves got some glue on them, was able to get it off with qtip and isopropyl alcohol. Phone doesn't look great on edges but it works fine. This glue says it has diamond powder large percent, is hard. Saved my phone for $8. Thanks!

I am glueing the life out of me. It works incredibly well. No other glue compares to this ..it is like magic.

Two things I found the first time I used this: it cures slowly. Like, hours (give it a day). And it's thinner than I was imagining. Not quite watery but not remotely thick. It's also not all that sticky when it's first applied--clamping is needed. I used this to bond a few 3D printed parts (PETG) together (clamped with zip ties) and to stick some magnets in. The 3D prints were not remotely smooth so a bit more viscosity would maybe have been good. But this seems to be working. I like the small needle tip for precise application and the pin on the cap to maybe prevent or clear clogs. Since it squeezes out thin due to the low viscosity it should go a long way. This is a large quantity of glue for my normal uses and I hope it doesn't harden in the tubes before I can use it all (a lot of single-part adhesives in the polyurethane and cyanoacrylate families (home-center brands) seem to have a pretty limited shelf life once opened for the first time.) Fingers crossed. If I get to use most of it I'll feel like I got a pretty good deal.

Appears to work as advertised. Comes with a very narrow tip which helped confine the bead to the outer edge during my attempt to glue the face of the fitbit back on.

Works as advertised! And the “nozzle” lays an extremely thin trail of adhesive which is exactly what you want it to do. Great product!

I liked it for being placed near the connection panels and it worked and has power. Recommended.

Excelente producto

The perfect stuff for gluing down replacement mobile phone screens. Easy to apply in controlled manner, with fine nozzle.

Needed to replace the screen on an old Huawei phone which had the back and screen bonded. In removing the old screen, the thin plastic "spacer" got damaged so needed a way to not only affix the screen but to fill the gap left by that now missing part. This stuff did just that. Using a small bit of plastic I could get a smooth seal between the screen and the body of the phone, leaving a nice, almost un-noticeable filled edge.

ideal for small gaskets fast drying good product

My iwatch screen seal had failed, and the screen fell off. Using this, I was able to re-attach the screen without Apple's expensive repair for a new screen and I had another quote of £80 to re-attach the screen from another independent shop. Even if I use this only once it has paid for itself in a single application. The very thin nozzle makes it a breeze and precise to apply.

Worked perfectly for my phone