Faucet Adapter,ExternalThread M28 to External Thread M22, Faucet Aerator Adapter, Suitable for Connecting Aerators to Kitchen Faucets, (M28-M22)

I recently installed the XNTONG faucet aerator adapter (M18.5 to M22 male threads) on one of the faucets in our bathroom and it’s been a smooth, risk-free fix that’s made things much more adjustable. The brass/copper-plated build feels solid and well-finished — not the flimsier material I’ve encountered on other adapters before. The threads matched perfectly with both my existing faucet and the new fixture I was adding, which eliminated the usual hassle of hunting down the right connector size. Installation took just minutes and no leaks have appeared even after weeks of use. Functionally, it gives me more flexibility with my setup. The adapter lets me attach different spray heads, water-saving aerators, or extension nozzles that weren’t previously compatible — which means I can fine-tune the flow or spray pattern in a way I couldn’t before. The fit is snug, everything seals up neatly, and there’s no dribbling or wobble when I turn the water on full blast. The copper-plated finish also resists discoloration and corrosion better than plain brass, so I feel confident it will hold up long term. A little thing that impressed me: even with the adapter in place, the water pressure remains consistent and the aerator I attached still performs exactly as expected — no weird turbulence or weird noises like I’ve had with cheap adapters. For such a minor component, achieving seamless integration without compromising flow or performance is a win. If you’re working on a plumbing update or just need to adapt a faucet to a different size thread without replacing the whole fixture, this XNTONG adapter is an excellent choice.

I bought a sink filtration system that attaches to the faucet head but because my sink had a recessed thread, I needed exactly something like this male to female (or female to male) metal adapter. It just threaded on to my faucet threading (with teflon tape of course) and fit nicely. I was then able to put the filter on with just enough room to get it tightened down. So, basically, this was the closest fit I could have gotten before I wouldn't be able to tighten the filter down. Anyways, I'd say this is a quality fitting and is at a good price for $6. If you need something like this, this is the one.

Just what I needed to attach my washing machine to the bathroom sink. My kitchen sink was clogged, and because of a broken pipe hanger it had 4 feet of sludge. I bought this so I could wash my clothes until I could clear the clog, which took 2 weeks. I tested it without using Teflon plumbing tape. Perfect fit with no leaks at all. Fit my washing machine adapter without issue. Definitely one of the highest quality fittings I have ever bought, anywhere. The threads were a perfect fit for my Peerless brass faucet and the washing machine adapter. It just screws in easily, no pipe wrench needed, and was a perfect fit. At this price I was impressed. I tested my water pressure, and it's a bit above 75 PSI, and to have this thing fit hand tight on both the faucet and the washer adapter without Teflon tape with no leaks on either thread is astounding! I wound up attaching the washing machine fitting to the kitchen sink because room is limited in the bathroom, but I am keeping this little gem in case I have to use the bathroom faucet again. I wish all the fittings I have in the house were made this well.

I've been looking all over for an adapter that would fit with the faucet extender I bought and I finally found it in this pack. Turns out I needed the M18.5 specifically and it worked out great. I was about to return the extender but I figured why not try to find an adapter for it. Since this was a multi pack full of different sizes, I figured I would definitely find one in here and I did.

This adapter fit perfectly in my relatively small sink faucet that had what is known as a "Tom Thumb" size aerator opening of 16.5mm and then attached to a Brita faucet water filter device that had a 22mm threading.

1. The absolute minimum size an adapter could be, this made use for a water filter complicated and prone to leaks, poor holds. 2. Silicone Ring provided was the thinnest possible, had to get a thicker one for practical use with a water filter. 3. Did work once complicated installation and thicker ring was handled. Did not break or snap a thread to my faucet or itself so quality is fine. 4. Value sucks, it could practically be longer & the ring is too thin for pressurized usage.

Worked? 🤷‍♀️

Funciona muy bien. Lo recomiendo

Si monta in un attimo e non perde una goccia. Il materiale sembra molto resistente nel tempo.

Exactement le raccord dont j'avais besoin pour installer mon mitigeur femelle M22 sur mon robinet avec embout femelle M24, le raccord est reçu dans une petite housse qui est elle-même dans une petite boîte en plastique avec deux joints (un dans chaque dimension, M22 et M24), le raccord me semble assez lourd pour être du métal et non une copie résine ou plastique peinte, l'installation est simple et n'a pas nécessité pour ma part de ruban téflon supplémentaire (aucune fuite malgré un serrage à la main, faites juste attention car le filetage est un peu coupant, également je conseille de le laver avant installation pour éviter de contaminer l'eau), un bon produit que je recommande !

Ook weer opgelost

Exactly what we needed, fitted perfectly.

Pour l'adaptation d'un mousseur à un robinet existant, a convenu parfaitement. Fourni avec les joints. Conditionnement parfait.