C8, Fans not Included, RTX 40 Compatible, Dual-Chamber, tooless Design, Type-C, 360mm Radiator Support, Seamless Tempered Glass Front & Side Panels, High Airflow Full-Tower E-ATX PC Case

Love this case. plenty of room for everything inside and it looks great. the cooling setup options are good as well. I have my AIO rad mounted in the top as an exhaust, 3 x140mm fans in the bottom as intake to blow straight up into the GPU, 1 x140mm in the back as exhaust, and 3 x120mm in the front side as intake. temps stay nice and cool. I love that it is a toolless design and there are plenty of tie points and bundle straps for cable management. it IS very wide compared to standard ATX cases but that is because of its dual chamber design that helps with cooling.

I’ve done many cases over the years. Thermaltake. Antec. Lian-Li. NZXT. Coolermaster. I’ve always found myself going back to Antec, as they have excellent layouts and everything you’d want in a case. This C8 is no exception. Lots of fan options, 98% tool-less, little niceties like an included small bin to organize your extra screws. Front panel connector is now a single line instead of all those little connectors you have to read schematics to put in because you can’t remember Intel’s layout when you build a new PC once every few years. Purchased Antec Non-A RBG fans to go with it, since this doesn’t include any. Not a big deal. Lots if space on the backside for SSDs and 3.5” drives if you are still rockin’ those. Panels come off easily and are secured just as fast, and you can rest assured they aren’t going to jiggle around. Motherboard installed easily, lots of airflow and barely audible even with 10 120mm fans. Even pushing it hard during a stress test the fans never spun past 600 RPM. 68F ambient temperature. CPU and Asus AIO keeps the Intel i5-12600k around 32-37c, even under heavy gaming with Starfield at max settings. The video card fans barely even spin up due to the cooling from the bottom intakes. Excellent quality case. Front side and bottom are intakes, rear single 120mm for exhaust, and plenty of room for my 360mm AIO and 3 120mm exhaust fans up top. If you have the space, this is what you want. Again, its MASSIVE. Not Thermaltake Tower 500 massive but still huge in its own right. See video for fan audible levels during idle.

I don't write reviews often but I must because this is such a great case!! It's been serving me so well for 8 months now! I was looking for more intake and better ventilation for my 360mm 38mm rad and I found it here! With the original case the NZXT H710i I was getting high CPU temps, upwards of 82-83°, mostly due to constriction on my rad, despite 40mm being the limit for size on the H710i but we all know now NZXT is mostly garbage. Instructions were clear, came with everything I needed to move my parts over, ample space for the fan controller, GREAT and I mean GREAT cable management avenues, bottom & side intakes is superior than front, fits my RTX 4080 Super nicely, and the case itself looks and feels great! Specs CPU: AMD 5950x GPU: MSI 4080 Super Suprim X RAM: 48GB on 4 sticks PSU: MSI 1000W 80 Platinum Fans: 3x 140mm bottom intake 3x 120mm side intake 1x 140mm rear exhaust 3x 120mm 3000RPM + high pressure top exhaust (38mm 360 rad)

This is an awesome case! My last case was a Corsair Carbide Series Air 540 White, so I wanted to give the vertical liquid cooled design a try and I’m impressed! Running a Ryzen 7800X3D and 5080 - Cyberpunk 2077 maxed out 1440p barely makes the the cpu and gpu reach 55C. They barely hit 70C @ 4k. The space for a full 360 AIO cooler, two 160mm lower case fans, three 120mm front/side fans, and one 140mm fans in so many different configs is awesome. You’ll be able to find your sweet spot regardless of your setup. The preinstalled cable management into the case gives you an idea of how the flow of wires should or could go. Very helpful for new builders and vets alike. The case comes with extra Velcro straps and zip ties. It also includes a tool kit for your screws. For being essentially only tempered glass and shell mesh, it’s quite sturdy and rigid. I never feel like I have to be gentle with it. Dust could be a problem as there is only one dust filter on the bottom. Overall this is a great case with a lot of space and well thought out engineering for gamers.

This case has been an excellent case. It’s easy to build in and fairly priced $150 w/fans. Though I would buy without fan next time as I switched to 3x 140mm bottom and rear, 120mm every where else. LIAN Li fans. Low resistance for airflow. Keeps the 9950x3d and 5090 cool while offering a clean look.

Le boîtier et vraiment j’ai plus avoir pas de boîtier et lui vraiment bien • il y a de la place pour le câble management • le boîtier et spacieux donc l’air respire bien • livrer avec 1 vent 120mm et 2 160mm • se démonte de partout et s’adapte à vous

I was stuck between two choices- this and the NZXT H6 Flow and chose this. Whole thing is built like a tank. Every single panel is sturdy, despite of the top panel not having any support at one end. This is a big boy. A lot of glass area, roomy PSU chamber, The O11 vibe is there. building in it was absolutely a breeze. It has ample room for cable management- even with a non modular PSU, you can easily manage the cables without resorting to jamming them up against the side panel. Speaking of the side panel, it is all vented. Main chamber is very wide too. Internal mounting mechanisms are top notch. Every HDD partitions have vibration dampening, PSU mounting is in a perfect spot so that cables reach on both ends of the motherboard well. With all that said, I found the external screw tolerances to be a bit on the tighter side- the PSU screw holes to be precise. I managed to scrape some paint off the case trying to insert a screw. Screw allignments are also a bit off. Also, the SSD caddies had thumb screws placed in such a way that if you put two of them in, one of the SATA power cable will interfere with it. Another point I noticed is the absence of a standby light. There is basically no way of knowing if the system is on unless any of your RGB stay on by default. Overall, this is one of the best cases you can build in. It is big, sturdy and roomy.

This case is huge, but it fits all of my components very well. Even a big 3 fan 7900XTX fits with lots of room to spare.

１年使っておりますが、このケース最高です 組立時もかなり分かり易いですし、裏スペースもかなりあるので、ゆったりと配線が出来ます 前に使っていたのが裏配線がかなりごちゃごちゃで狭かったのでケースを閉める時に苦労しましたが、広いのですんなり組み立てられました。 さらに、ライティングのファンなどを搭載するとめちゃカッコいいPCの出来上がりですね、そしてこのお値段、クオリティー、言う事なしだと私は思いますね。 次はこちらの木目バージョンで組みたいなと思っておりますｗ

Pleasure building in this case! Wish it came with fans but, overall very good case