This product contains/This item includes: 3 pieces/PC act NEMA34 34HS1456 stepper motor with dual flat shaft (threaded) Step Angle: 1.8 ° Voltage: 2.8 V Rated Current: 5.6 A/phase Resistance: 0.5 Ohm/phase Induk Dance: 5.5 MH/phase Holding Torque: 8.4 N.m (1190OZ in) Locking Torque: 12.5 N. cm Max Torque: 2200 g cm² Pipe slots: 4Thread diameter: 14 mm Dual flat thread size: 13 mm (1 mm for flat) Motorlängeh: 116 mm. Weight (kg): 3.8 Cable connection: 4 wires: red - a +, Green - A - B + - Yellow Blue - B channel 3x DM860 driver + 1pc breakout board and cable for stepper motorElectrical specifications: Input Voltage: 24 - 80 Vdc Input Current: , Output Finish: 2.8 A - 7.8 A Consumption: 80 W, Inner installation: 10 A Temperature: Operating Temperature: -10 - 45 °C; Storage Temperature: -40 - 70 °C Micro steps: 256Humidity: no condensation, no water drops/rain dropGas: Do not use near combustible gas and conductive dust Weight: 550 g The DM860 is one of the 2 phase hybrid stepper motor Drivern. The operating voltage is between 24 and 80 VDC. on DM860 has been developed for all types of 2-Phase Hybrid Stepper Motors, The Have a outer diameter of 57 up to 110 mm and a phase current of less than less than 7.8 A Need. The circuit similar that makes the servo control and allows the motor, smooth as well as noise and low vibration to walk. The driver is with increased speed operated the moment and the positional accuracy superior than in a drives of similar type. Email: Office @ act motor. com TEL: + 49 (0) 421 9601 230
Trustpilot
4 days ago
3 weeks ago
