ARCTIC Liquid Freezer III Pro 360 - AIO CPU Cooler, 3 x 120 mm Water Cooling, 38 mm Radiator, PWM Pump, VRM Fan, AMD AM5/AM4, Intel LGA1851/1700 Contact Frame - Black

I’ve been running the ARCTIC Liquid Freezer III Pro 360 for a bit now and I’m genuinely impressed — it’s a proper bit of kit and, for the money, it’s an absolute cracking AIO. Cooling performance has been excellent. The big 38mm radiator clearly makes a difference compared to a lot of standard 27mm AIOs, and it pulls heat out fast under sustained loads. In both gaming and heavier CPU workloads the temperatures stay consistently under control, with no sudden spikes or “heat soak” behaviour that cheaper units sometimes suffer from. Noise levels are another strong point. The PWM pump and fans ramp smoothly and don’t have that annoying whine or rattly tone you sometimes get at certain RPM ranges. You can set a sensible curve and it stays quiet in day-to-day use, only really spinning up when it actually needs to. A standout feature is the little VRM fan on the pump block. It sounds like a gimmick, but it’s genuinely useful — especially if you’re pushing power limits, running long sessions, or you’ve got a case with less airflow around the socket area. It helps keep the surrounding components cooler and just adds to that “thoughtfully engineered” feel. Installation was straightforward and the included mounting for AM5/AM4 and Intel LGA1700/LGA1851 is a big win for compatibility. The included contact frame (for Intel) is a nice touch as well — it shows ARCTIC are thinking about real-world results, not just spec sheets. Build quality feels solid throughout: the radiator, tubing, and block all feel premium, and once fitted it looks clean and purposeful in black without trying too hard to be flashy. Overall: if you’re looking for a high-performing 360mm AIO that doesn’t cost the earth, this is one of the best value options out there. For the price, it’s a cracking AIO — quiet, powerful, well-designed, and clearly built by a company that knows what it’s doing. Highly recommended.

I’m using this 360mm AIO for my cybersecurity setup and it’s exactly what I needed. It handles the Ryzen 9 7900 easily and stays quiet even when I’m running several VMs at once. The build quality feels premium and it was a good value purchase. Just make sure your case has room for the thick radiator. No complaints.

Best AIO i have used so far Why did you choose this product over others?: The price and reviews from youtube From what i found out has some of the best cooling and for that price cant go wrong Performance: As i said keeps thing nice and cool Chunky radiator with 3 very good fans Also has a VRM fan which is great Build quality: Very solid build very good quality Look: Looks very nice i got the all black no rgb version looks very nice Thickness: Very thick radiator make sure to check sizes to see if it fits in your case as it is bigger than most AIOs Fit: Fit well in my case as i did check measurements before hand Size: Its very big as i have said before make sure to check measurements of your Case Also very easy to install and pretty quiet aswell

If you are looking for a really quiet solution to cool down your CPU, you'd struggle to find something better. If you want the best possible cooling solution and don't mind having a jet engine inside your case, there are better options out there. Over all, I believe it's the best compromise between cooling and noise, hence why it's been voted by most of reviewers as the most efficient cooler (and tends to be even better for AMD CPU's). But, there are a few things to check carefully before you press "Buy" : It can only be mounted in one position, with the tubes "down". If you have a vertically mounted GPU, this might be a nightmare as you'll need to mounted as low as possible to clear the tubes. The radiator it's thicker than the "standard" 25mm, so having it mounted on the top of the case might be tricky as on most of the cases you don't have too much room before it hits the motherboard or cable going into the motherboard. If you don't have the option to offset the radiator, no chance! Front or side mounted (like in my case) should work fine in most cases. When front / side mounted, you want to pull the air from outside the case so the fans will act as intake - again, the radiator it's thick, so you won't get as much intake you'd think with 3 fans. Make sure you don't rely on these as the only intake option. Other components will cry for cold air. The VRM fan does help and you can hardly hear it even at 100%. Set back to about 80% and completely blends in with the other fans.. The pump it's also silent (can't hear it unless my ear it's right next to it) and I'm a bit surprised when reading reviews saying the pump it's loud; maybe quality check issues, or radiator mounted in a wrong (lower than the pump) position? Over all, at least for me, it's the best compromise, not to mention the very good price too. A bit more flexibility when it comes to installing it and it would be a "perfect 5 stars". I'm curious what Arctic will bring with the new model as it looks like they always listen and come up with new ways to improve things! 1st photo at idle and the 2nd with Cinebench R23 running in background. All P cores fixed at 5.3GHz and E Cores at 4.2 GHz, Undervolted -0.110000

I upgraded from a 240mm Cooler Master to the Arctic Liquid Freezer III 360. With this new cooler installed, my Ryzen 9 5900X now runs 10 degrees lower and has a more stable idle temperature.

Bardzo dobre chłodzenie za dobrą cene

Arctic produit de très bons AIO depuis de nombreuses années. Celui-ci ne déroge pas. Je recommande. Montage aisé par rapport à certains concurrents.

Best cooler on the market 2025 Good price and one of the best performances

Tengo un Ryzen 7 5800x procesador bastante calientito, lo enfriaba con aire con un DeepCool AK620 y la verdad no iba mal, la temperatura en juegos se mantenía en 80 grados celcius y en sesiones de trabajo si llegaba a los 90 grados, entonces vi que este enfriador líquido acababa de salir y que su antigua versión había sido muy buena y decidí probarlo. Y pues la verdad no hubo mucho cambio, las temperaturas bajaron entre 3 y 5 grados ya con la curva de enfriamiento ajustada, el ruido cambio eso si no tiene comparación esta madre es mucho más silenciosa qué un enfriador de aire. Una cosa que no tome en cuenta fueron las medidas, me confíe por que tengo un Corsair 5000D y pensé que me sobraria espacio y no fue así, el radiador no entro en la parte de arriba, choca con los disipadores de la MB entonces tube qué colocarlo en la parte frontal usando métodos de ajuste a la Mexicana y quedo perfecto, tons el consejo es que revises bien las medidas sino quieres tener problemas de instalación. Cha-chauu...