MOOER PC-Z Shape Z Pedal Connector Patch Connector (1-Pack)

They're easy to use, and the space you save! I was using these 1/4"x 4" connector cables that just would not let me squeeze my pedals together the way these Z shaped connectors do. I want Mooer of 'em!!

Looks great on my Mooer mini pedal board. Holds pedals tight in place, perfectly spaced, as well.

These don't really need a review. If you are looking at them you are probably familiar with Mooer and the expectations of quality are met here. These Z connectors really let you conserve space on your board with no compromise in signal. Highly recommend them and their straight ones to any pedal junkie.

These are twice as expensive as the typical patch cord used to connect pedals, but they do allow you to get pedals closer together, and they should be more reliable, with no flexing cable to create noise or fail. On the other hand, that flex can be helpful in preventing the over-stressing of jacks if your pedals aren’t rigidly attached to a board, they only work with Mooer pedals or those having an identical configuration of jacks, and it looks like they could have gotten much tighter spacing. Time will tell.

Every other Z-connector didn't offset enough for the mini pedals, best way to connect the pedals and save space on a pedal board. Leaves the Mooer and Donner mini pedals in a nice, straight line.

The off-set between the pins on these z-connectors is exactly as I expected to insure proper alignment of my Mooer pedals on my pedal board, but I was disappointed to find they cause unnecessary added space between my pedals due to a collar at the base of the pins. Not a problem if you’re not limited for space on your pedal board, not using a pedal board, or you have big feet and feel you benefit from more space between your pedals.

Bought a bunch of these for the my Mooer M6 Firefly & Mooer PB-05 pedalboards. While they work fine in the pedalboards, they aren't very good while the pedals are on the floor. They're just way too unstable. You also need to remove most of the pedals (while cradled in the Firefly or PB-05) to exchange a pedal. That is why I went with the EBS 10 cm Flat cables. So much easier to exchange pedals now.

Couldn't ask for a better guitar pedal connector, if you're not concerned about having your pedals farther apart from each other. This was definitely a must buy for me.