Govee RGBIC 65.6ft (20 meters), Color Changing LED Strip, Bluetooth APP Control, Smart Sectional Control, Multiple Scenes, LED Lights

I love these lights! This is my second time ordering because I moved. They last for years. The app is a bit complicated at first but when you get the hang of it you can do some amazing and cool stuff. They are very bright. They stuck to my walls great. Just be careful not to bend or push into the corners of walls to much you’ll break the connection but that’s with all led lights. My favorite part of these led are the quality and you can pick where you want each color and make your own patterns. Highly recommend will buy whenever I move again!

Hello! I'd like to provide you with my review, highlighting the pros, cons, and some helpful tips, none of this would be in order. PROS: Adhesive: While not astonishing, the adhesive on these LED lights is worthy of speaking. Unlike previous LED lights I've purchased that fell within hours, these ones are holding up great. If you have a smooth wall, you'll have no trouble at all. I struggled a bit due to the bumps on my wall, but once the adhesive made contact with the wall, it works great. App Control: Since this product doesn't include a remote control, you'll have to use either the power box or the app. I opted for the app, and I have no complaints about it. It uses Bluetooth and allows for further customization of the lights. Quality: The quality of these LED lights is noticeably superior to the cheap $10 ones you find. They are sturdy and well-made, although there is a slight drawback to be mentioned later. Brightness: The brightness of these lights is simply amazing. It's definitely their standout feature. I'll provide a video above showcasing each color at its brightest setting, so you can judge for yourself. Cutting: Contrary to misinformation, you can indeed cut these LED lights if needed, although it's not recommended by the company. In the tips section, I'll guide you on how to do it properly with an image above helping you understand. CONS: Packaging: The packaging needs improvement. I strongly recommend LED companies to stop using flimsy tape. Unfortunately, the beginning of the LED strip bent too much due to the packaging, and I had to contact customer support. Thankfully, I didn’t have any problems getting a replacement. Thank you Kathy. Power Box: Functionally, the power box is fine, but setting up the LED lights with it was annoying. It was one of the major issues I encountered during installation. The power box is too heavy, causing the lights to fall off the wall repeatedly. I'll share a tip below on how to address this problem. Bending: Here's where the product loses a star. These LED lights are not meant to be bent AT ALL. They come with cables and a control box that cannot be removed, so you need to adjust them downward to avoid an awkward look. Even the designated bending area doesn't work well; it feels fragile and prone to breaking. The initial portion of the LED strip should be more flexible, I wouldn’t be surprised if I actually ended up breaking these because of it. TIPS: Clean: Clean your wall with the alcohol packets provided before applying the adhesive. Your wall isn't regularly cleaned, and if it is don't worry, I'm not a judge. Typically, dirt sticks to the adhesive instead of the wall. Cutting: The highlight of this review—yes, you can cut the LED lights. Here's how: I'll include an image above with directions. Look for the three copper points spaced a few inches apart, each with a line in the middle. When deciding how much to cut, aim to cut exactly in the middle or, WHAT I RECOMMEND, a tiny bit away from the line. Just to note you're still on the copper point but your a few millimeters from the middle line. Why I don't recommend cutting in the middle is because if you cut straight in the middle, there's a chance you'll cut both side and you'll have to move to the next copper point. Keep in mind that once you cut it, the side with the excess won't work anymore. Cutting: Another big tip is if you do turn out having a lot of excess LED lights, try practicing it on those before you cut where you need to for it to fit your room perfectly. This is what I did and I actually ended up cutting those copper side points so I’m glad I followed this. TIPS: Please have strong tape or a person helping you on the beginning part of this. This is the most frustrating part of setting it up since they will keep falling down because of the weight. TIPS: Once you do cut it and the LED’s still don’t perfectly fit your wall just try placing it on top of each other at the ends. Just don’t have it at the maximum brightness because they can probably overheat if you do this. Also don’t bend it since it’s the actual part of the LEDs. TIPS: Measure your room, either with a measuring tape or actually put the LED's up too see how much actually fits and once you're done take them back down and cut. This is my overall experience and hope this will help anyone.

I recently added LED light strips to my room, and they’ve completely transformed the space! These lights are fantastic. They offer a vibrant, customizable glow that enhances the entire atmosphere. The colors are rich and the brightness is perfect, whether you want a soft ambiance or a more intense look. What really sets them apart is the app. It's super user-friendly, allowing me to control the lights effortlessly from my phone. I can change colors, adjust brightness, and even set timers or sync the lights with music, all with a few taps. The app works seamlessly, which makes using the lights even more enjoyable. Overall, I couldn’t be happier with these LED light strips. They’re a great addition to any room and the smart features are a huge bonus! Highly recommended!

Asked for Christmas gift. Perfect!

regret buying 30 led per m. whatever diffuser i use it wont diffuse entirely. i need at least 2in apart diffuser if i dont want to see dots. but its impossible to get 2in apart diffusers. i have to buy like business level kind of diffusers. only those are far apart. so overall. i love the functions and color changings and everything.. but 30 per m is tough to get no dots diffuser. i even tried milk color curved spotless diffusers, but it will still show dots if its not 2in apart.