22" Magic Arm w Clamp Camera Mount, Adjustable Articulating Arm Friction Camera Boom Arm w 1/4" Thread, Overhead Camera Desk Phone Mount Clamp Stand for Tripod Light Webcam Mic Video Rig

The media could not be loaded. Overall works well and does the job. I mainly use it for BTS when I do live production broadcast. It feels sturdy and is pretty lightweight. You can adjust it pretty well and it is a decent size. It actually holds on pretty good, my only complaint would be that sometimes after adjusting, it will move a bit which messes with my framing. But it’s easily manageable. I think it has to do with the weight of my phone and how far out I have it, but after that it hold pretty well.Overall pretty good product, I’ve had it almost a year now and its been pretty good. Below is a video showing how stable it is when I pan and track with my camera. Amazon only lets me add one video for a review.

The JEBUTU 22" Magic Arm was designed for cameras, mics, and lights, but I decided to think outside the box (or rather, the snowbank) and used it to mount my snowplow joystick in my truck. And let me tell you—this thing works like a charm.The adjustable arm and sturdy clamp hold the joystick in place, even during bumpy rides and aggressive plowing. The articulating design lets me position it exactly where I need it, making the whole setup feel ergonomic and professional. The 1/4" thread and friction adjustment are perfect for dialing in just the right amount of tension, so it stays put but can still be adjusted easily.Who knew a camera mount could moonlight as a snowplow joystick holder? If you need a versatile and rock-solid mount for just about anything, this Magic Arm is your answer. 10/10 would plow again!

I use this to hold a cellphone in place to act as a camera for a 3D printer. And it works well enough for that. I want to apologize in advance for any terms I incorrectly use regarding the arm.Pros:-The base clamp is very strong and grippy. I have never once worried about it slipping or loosening from vibration or force.-The phone is very secure in that clamp. The spring that pulls the two halves together is very strong and applies a lot of grip strength.-the configuration of the bars that make up the arm allow you put the arm is almost any position and largely keep it there.-lightweight and feels sturdy. I haven't had any concern about damaging parts.Cons:-The nut that locks the arm in place on the clamp has not been reliable. It will tighten enough the arm won't move much... unless you touch it, then slips very easily. The design of the clamp and nut doesn't really allow you to tighten it enough to prevent this. Of all the joints l, this is the only one I have to constantly adjust.-there is a pin and hole that line up between the base clamp and the arm that do not fit well together. The pin is too small for the hole and allows quite a bit of rotation as a result. This, combined with the issue above, basically remove the usability and function of the quick connect between the arm and base, which was the reason I selected this one over others.-the phone clamp could use a bit of rubber or some other grippy material on the two halves. While the clamp holds the phone well, it's still fairly easy to move to phone.Overall, it works well enough, but the few weaknesses mentioned hurt a lot of the functions I explicitly wanted it for.

This clamp is a game-changer for flexible phone camera positioning. The 22” version is the one I ordered—you can always adjust it for shorter setups, but the extra reach makes it incredibly versatile. The clamp itself is rock-solid and doesn’t budge if tightened properly, and you can attach it to just about anything.The T-joint knobs are well-designed—not flimsy at all. They’re easy to grip and tighten, making them perfect for larger hands. Once tightened, the joints feel really strong.One gripe: If the rotating knob near either base isn’t super tight, the whole thing can fail, which could put your mounted gear at risk. Always double-check that section. If this part were improved, I’d feel more confident using it with a heavier camera like a DSLR. For now, I’m sticking to my phone.Overall, I’d still recommend it—solid 9/10. It’s not perfect, but it’s good enough for what it does

This is a sturdy, adjustable arm. I'm using it to hold my fume extractor while soldering. My use case may not be typical, but it works well for my needs. The fume extractor hood is relatively heavy, but the arm is able to support it. I can also adjust it as needed based on my work.

This is a sturdy arm. I use it to attach LED lighting for macro photography. It’s sturdy enough for fairly small lights, but would not hold a camera.

It's a beautifully Constructed item for light camera/phone/mic/Tablet usage. Anything with weight wouldn’t be useful or great. I hoped to use it with a classic blue Yeti Condenser Mic. The mic was too heavy for the item to hold in position for too long. Tablets wouldn’t go well either due to weight. The rubber Plastic parts at the base and in the joints need to be redesigned. TSome are glued and wouldn’t last more than two weeks of regular usage. Also, it's not ideal if you want to move it a lot. It's more of a stationary, forget-type device. You have to use it twice daily to move it back and forth into position for recording or what have you. Then, the joints give out after a few weeks. For me, it took about two weeks. You can see the rubber parts and washers that are given out on the joints.The metal portion is beautifully done. The blots and Metal parts are precise and beautiful .The idea is valid, very valid. It would be beautiful if it were tested to function correctly for Prolong usage, but just a quality check wasn’t done for everyday use.If you guys look to improve it and would like to have someone check it, Or even share some improvement notes. Amen Contact me please.Most of the joints and attachments are 100% standard, Which is a beautiful thing. It comes with all the adapters for phone, camera, and mic Compatibility.3 stars for Construction of it.Could be a 5 star item if few Improvements were to be Implemented. 🌹🙏🌹🧐

This thing is great and very handy. Holds very well.