WINMAU Xtreme Dartboard Stand 2 – Free Standing Portable Dart Board Stand

Bought this to reduce the noise of the darts hitting the board on the wall. It completely solved the problem. Very sturdy. Used daily.

Exactly what I was looking for. Sturdy, quality materials. I wanted a setup I could move around or travel with. This fits the bill for my GranBoard setup.Mounted the GranBoard U Mount to the stand by drilling 4 holes. Can take the board on and off easily and adjust as necessary.I also mounted the TV I use to cast the app to and because of having 4 legs there are no issues with instability!Only kind of negative I can think of is the stabilizer rod (used on the backside to keep the board more sturdy and in place when throwing darts) could use a different way to connect to the pole other than a rubber strap.So this overall will work with any dartboard not just Winmau (if you are willing to drill some holes or make a mount)

Like so many others, I wanted a portable mount for my Electronic Dartboard. I took a chance on this one because it has 4 legs instead of the usual 3, and its board mount allowed more stability. The gamble paid off. The dartboard itself weighs approximately 15 pounds, and I used 1x4 western red cedar for the mount frame. I bolted the frame to the dartboard mount using 1/4“ dia by 1.5" long bolts, nuts, and washers on both sides. The 3 holes in the metal mount are a cat hair shy of 1/4“, so I easily drilled them to 1/4".With the feet fully extended, I have no problem getting the bullseye 5'7" from the floor. It's very stable, with only a tiny shake when a dart hits the board. When I say "stable", it's not going to fall over or lean at all! That said, I would not do this unless you extend the 4 legs fully.The mount is heavier than I thought it would be, which is a good thing. The adjustment for height accuracy can be a little tough for 1 person, but easy with 2 people. A tightening allen wrench is included and is easy to keep in the magnetic tray.In conclusion, if you've the skills to build a support frame, then this stand will do the trick for your electronic dartboard. Highly recommended!

I had high hopes for this stand. And I was Not disappointed. This stand is strong, balanced and easy to use and store. 5 stars!

Overall, I'm very pleased with this stand. It's extremely sturdy; plus, the equipment tray and stabilizer bar are nice touches. My only complaint, it requires three screws in the back of the board, so if you are rotating on a regular basis this becomes inconvenient. It's also difficult to level the board without the rota-lock.My recommendation; install the board only with the center screw first, rotate until the board is level, mark the adjacent holes with a Sharpie, then remove the board and install the final two screws.

Yes this is the one. It's easy to adjust and it's high quality.

used to prop up bigfoot costume in MIL's backyard. got some hysterical footage from the nature cam. highly recommended

Purchased one of these in the Spring. Works great. However I would like to be able to swap between using a Standard Board and a Practice Board/Champions Board.Any possibility that the Fixing Plate could be purchased separately or a different plate made available that is compatible with the quick switch mounting brackets/pucks? Thanks.